A-Z index

The acrylate and methacrylate Sarbio^® grades, based on renewable raw materials, allow formulators to combine high technical performance requirements along with environmental friendliness. With this offering, Arkema demonstrates its support to customers whose aim is to develop new formulations with lower carbon footprints. End-users can develop new systems with increased bio-content.

SARBIO® 5102 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SARBIO® 5102 NS, isobornyl acrylate, is an excellent reactive diluent for oligomers. The cyclic group produces polymers through free radical curing that have a high glass transition temperature.

Sarbio® 5201 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

Sarbio® 6101 NS, methacrylate ester, is a low volatility monofunctional monomer with a long chain aliphatic hydrophobic backbone.

SARBIO® 6104 NS is a high performance monofunctional methacrylic monomer designed for use as reactive diluent in peroxide curing systems or as co-monomer for polymer synthesis.

SARBIO® 6105 is a monofunctional methacrylic monomer for use in UV/LED/EB  and peroxide curing applications.

SARBIO® 6105 NS, methacrylate ester, is an excellent reactive diluent for oligomers. The cyclic group produces polymers through free radical curing that have a high glass transition temperature.

Sarbio® 6105 NS, methacrylate ester, is an excellent reactive diluent for oligomers. The cyclic group produces polymers through free radical curing that have a high glass transition temperature.

SARBIO® 6201 is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SARBIO® 6202 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SARBIO® 7106 is an acrylated vegetable oil oligomer developed for energy-curable ink and pigmented coating systems. It imparts hydrophobicity, good flow, and pigment dispersability to litho or offset inks.

SARBIO® 7107 is a pentafunctional epoxidised soy bean oil acrylate oligomer for use in UV/LED and EB curing applications.

SARBIO® 7201 is an hexafunctional polyester acrylate oligomer for use in UV/LED and EB curing applications.

SARBIO® 7202 is a tetrafunctional polyester acrylate oligomer for use in UV/LED and EB curing formulations.

SARBOX SB510E35 is a moderately functional, carboxylic acid and anhydride containing methacrylate oligomer blended in SR454, ethoxylated trimethylolpropane triacrylate monomer. Reactive solids are 100%. It offers excellent cure speed, excellent adhesion to metal and plastics, good wetting and flow characteristics. SARBOX SB510E35 also has excellent thin film adhesion to electrocoated steel.

SARET® SR500 coagent is a trifunctional, low color, low staining, scorch retarding aid which contains nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties.

SARET® SR515 coagent is a trifunctional, low color, low staining, scorch retarding coagent that contains nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties.

SARET® SR516 coagent is a difunctional, low color, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties.

SARET® SR517 coagent is a trifunctional, low color, low staining, scorch retarding aid which contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties.

SARET® SR517HP coagent is a trifunctional, low color, low odor, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties.

SARET® SR519HP coagent is a trifunctional, low color, low odor, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties.

A product range of MCure^® reactive modifiers and diluents for two-part epoxy/amine cured systems. Due to their rapid reaction and excellent diluting effect, these products can help formulators to produce low VOC systems required by specific applications overcoming the disadvantages of typical glycidyl ether diluent/modifiers.

A product range of liquid Saret methacrylic coagents with varying functionalities for use in peroxide curing of elastomers. Peroxide curing of elastomers is an alternative to sulfur vulcanization that offers superior heat-aged performance. Saret coagents are available as proprietary mixtures with radical-scavenging retarders that provide prolonged scorch safety, while maintaining cure rate and increasing crosslink density.

A wide product offering of Speedcure photoinitiators for UV/LED free-radical and cationic curing of resins, varnishes, coatings and inks. Our photoinitiators are valued for their applicability across all key UV/LED curing technologies ranging from 3D printing, specialty coatings, adhesives, and printing inks to automotive, electronics, composites, and packaging industries.

The Sartomer® product line has one of the broadest ranges of acrylate monomers, oligomers, and specialties available.These products use UV, EB, LED, peroxide and amine cure technologies for the coatings, inks, adhesives, composites, 3D printing, construction markets, dedicated to many high performance consumer and industrial applications.

A range of Speedblock additives such as hindered amine light stabilizers (HALS), UV absorbers (UVA), Antioxidants and Optical brightening agents (OBA) for UV, thermal or cationic curing. 

A product range of Uvicure cationic resins, including cycloaliphatic epoxy resins, valued for their high adhesion, low shrinkage and chemical resistance, and oxetanes, used in conjuction with cycloaliphatic epoxy resins, to improve speed of cure, viscosity control, hardness and adhesion to difficult substrates. These cationic resins offer high performance in a variety of applications, such as 3D printing, coatings and inks, composites, electronics and adhesives. 

A full range of specialty acrylate monomers and oligomers to answer evolving regulations and directives for indirect food packaging applications.

The Sartomer^® product line offers a wide range of methacrylate monomers and oligomers. Methacrylate monomers are used in applications ranging from chemical intermediates to composites to adhesives and sealants to elastomers and more. In addition to diluency, these monomers impart a variety of key performance characteristics, including heat resistance, chemical resistance, and adhesion. Methacrylate oligomers provide hardness, chemical resistance, and other properties critical to coatings and adhesives.

SB400 is an octofunctional acid based adhesion oligomer diluted with 30% of PGME for use in UV/LED and EB curing applications.

SNAP® 2709 is a low MFFT acrylic emulsion with a morphology specifically designed to allow an excellent film formation. It is particularly adapted to the formulation of trim enamels for exterior and interior applications. SNAP® 2709 is formulated without alkylphenolethoxylates or formaldehyde. SNAP® 2709 has been developed to be used as binder for both interior and exterior trim enamels. Its specific & controlled structure ensures a stable minimum film formation temperature as well as a very good film formation with no coalescing agent even at low temperatures. In terms of film properties, SNAP® 2709 allows to get a coating exhibiting a good compromise of flexibility and hardness and a very good block resistance. The final properties of the coating are achieved extremely rapidly (within 24 hours of drying) and are stable with time as no coalescing agent (VOC or non VOC) is used. SNAP® 2709 is a binder of choice for durable exterior coatings.

Binder that offers outstanding block resistance in low or zero VOC high-gloss coatings, and is an excellent choice for low odor systems.

Modern protective and industrial coatings require advanced, robust technologies. Arkema offers a wide range of liquid resins for solvent-borne coatings designed to address the issues you encounter every day – including compliance with sustainability requirements, performance in extreme conditions, enhanced durability and providing value for your customers.

Additionally, solvent-borne resins bring a range of high performance attributes to architectural coatings, offering enhanced durability and value across a range of applications.

We offer versatile solutions for your high demand applications that can help you develop the best possible coatings for your customers.

SPA 8000 NS has been developed for UV/EB-cured laminating. SPA 8000 NS imparts excellent adhesion, flexibility, and water resistance to laminating adhesive formulations - especially those for plastic film.

SPA 8001 NS is a di-functional aliphatic urethane acrylate oligomer characterized by low color. It is non-yellowing and imparts softness and flexibility to adhesives, coatings, and inks.

SPA 8002 NS is a di-functional urethane acrylate oligomer, this oligomer have good adhesion on different substrate, especially on metal, it also have good toughness and moderate strength.

SpeedBlock 770 is a low molecular weight, easily dispersed, hindered amine light stabiliser (HALS) for use in polymer processing, coatings and adhesives. SpeedBlock 770 is typically used at 0.1 - 0.5% depending on the processing conditions and end application.

SpeedBlock DP74 is a fluorescent whitening agent, with excellent stability in low pH systems, for use in ink and coating applications. SpeedBlock DP74 is used in warm white and pastel tones where the degree of whiteness of the paint/ink needs intensifying. SpeedBlock 74 will mask the yellow self colour of some formulations and will increase the deep tone of blue/black inks. SpeedBlock 74 is recommended for use at concentrations between 0.02 - 5.0%. The actual use level chosen depends on the particular application and end user requirements.

SpeedBlock OB-184 is a fluorescent whitening agent, with excellent chemical and thermal stability, for use in ink and coating applications. SpeedBlock OB-184 is used in white and pastel tones where the degree of whiteness of the paint/ink needs intensifying. SpeedBlock OB-184 will mask the yellow self colour of some formulations and will increase the deep tone of blue/black inks. SpeedBlock OB-184 is recommended for use at concentrations between 0.02 - 5.0%. The actual use level chosen depends on the particular application and end user requirements.

SpeedBlock UV-0 is a benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-0 is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application.

SpeedBlock UV-6 is a highly polymer compatible benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-6 provides low odour and volatility during high temperature processing and is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application.

SpeedBlock UV-9 is a highly efficient benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-9 is ideally suited for exterior coatings and is typically used at 0.1 - 5.0% depending on the processing conditions and end application.

SpeedBlock UV-92 is a blend of hindered amine light stabilisers (HALS) for use in polymer processing, coatings and adhesives. SpeedBlock UV-92 is ideally suited for exterior coatings and is typically used at 0.5 - 2.0% depending on the processing conditions and end application.

SpeedCure 2-ITX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 259 and 383 nm. SpeedCure 2-ITX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure 2022 is a liquid formulation of photoinitiators, with absorption maxima at 243 and 280 nm. SpeedCure 2022 provides balanced curing in a broad range of applications when used at 0.5-5 wt% in UV curable formulations.

SpeedCure 210 is a formulation of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 210 provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations.

SpeedCure 2100 is a liquid formulation of photoinitiators, with absorption maxima at 228, 272 and 368 nm. SpeedCure 2100 provides excellent depth curing for a broad range of applications when used at 0.5-5 wt% in UV curable formulations.

SpeedCure 2959 is a water dispersible Norrish Type I photoinitiator from the hydroxyacetophenone family, with absorption maxima at 219 and 275 nm. SpeedCure 2959 provides low yellowing and surface cure when used at 0.5-5Iwt% in UV curable formulations.

SpeedCure 4265 is a liquid formulation of photoinitiators, with absorption maxima at 240, 273 and 380 nm. SpeedCure 4265 provides balanced curing in a broad range of applications when used at 0.5-5 wt% in UV curable formulations.

SpeedCure 500 is a formulation of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 500 provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations.

SpeedCure 510 is a formulation of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 510 provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations.

SpeedCure 7010 is a polymeric Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 312 and 383 nm. SpeedCure 7010 provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when used at 0.1-8 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure 7010-L is a 40% active liquid polymeric Norrish Type II photoinitiator of the polymeric thioxanthone family. SpeedCure 7010-L provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when used at 0.1-10 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure 7045 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7045 provides low odour, low migration and generates active species when combined with Norrish Type II photoinitiators in pigmented UV and LED curable formulations.

SpeedCure 73 is a liquid Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 73 provides low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations.

SpeedCure 84 is a Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 84 provides low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations.

SpeedCure 937 is cationic photoinitiator of the iodonium hexafluoroantimonate family, with absorption maximum at 230 nm. SpeedCure 937 provides high reactivity and high solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED curable formulations when sensitised with thioxanthones.

SpeedCure 938 is cationic photoinitiator of the iodonium hexafluorophosphate family, with absorption maximum at 241 nm. SpeedCure 938 provides high reactivity and solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED curable formulations when sensitised with thioxanthones.

SpeedCure 939 is cationic photoinitiator of the iodonium borate family with absorption maximum at 258 nm. SpeedCure 939 provides high reactivity and solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED curable formulations when sensitised with thioxanthones.

SpeedCure 976 is a 50% active liquid cationic photoinitiator of the sulfonium hexafluoroantimonate family, with absorption maxima at 230 and 295 nm. SpeedCure 976 provides high reactivity in cationic systems when used at 0.5-5 wt% in UV formulations.

SpeedCure 976D is liquid cationic photoinitiator of the sulfonium hexafluoroantimonate family in a reactive diluent. With absorption maxia at 230 and 295 nm, SpeedCure 976D provides high reactivity in cationic systems when used at 0.5-5 wt% in UV formulations.

SpeedCure 976s is cationic photoinitiator of the sulfonium hexafluoroantimonate family, with absorption maxima at 230 and 295 nm. SpeedCure 976s provides high reactivity in cationic systems when used at 0.5-5 wt% in UV curable formulations.

SpeedCure 992 is a 40% active liquid cationic photoinitiator of the sulfonium hexafluorophosphate family, with absorption maxima at 230 and 295 nm. SpeedCure 992 provides high reactivity in cationic systems when used at 0.5-5 wt% in UV curable formulations.

SpeedCure AcBP is a Norrish Type II photoinitiator from the benzophenone family, with acrylate functionality and an absorption maximum at 254 nm. SpeedCure AcBP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations.

SpeedCure BCIM is a photoinitiator of the hexaaryl bisimidazole (HABI) family, with absorption maximum at 264 nm. SpeedCure BCIM produces highly reactive species when used at 0.1-5 wt% and combined with appropriate co-initiators such as, LCV or thiols in UV and LED curable formulations.

SpeedCure BEDB is a liquid amine synergist of the aminobenzoate family. SpeedCure BEDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations.

SpeedCure BKL is a Norrish Type I photoinitiator from the acetophenone family, with an absorption maximum at 253 nm. SpeedCure BKL provides high reactivity and surface cure when used at 0.5-5wt% in UV curable formulations.

SpeedCure BMS is a Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 246 and 315 nm. SpeedCure BMS provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure BP is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 252 nm. SpeedCure BP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations.

SpeedCure BPO is a Norrish Type I photoinitiator from the phosphine oxide family, with absorption maxima at 281, 365 and 395 nm. SpeedCure BPO provides high reactivity and depth cure when used at 0.5-5 wt% in UV and LED curable formulations.

SpeedCure CPTX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 314 and 389 nm. SpeedCure CPTX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure DETX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 261, 291 and 386 nm. SpeedCure DETX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure DMB is an amine synergist of the aliphatic amine family. SpeedCure DMB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations.

SpeedCure EAQ is a Norrish Type II photoinitiator of the anthraquinone family, with absorption maxima at 256 and 327 nm. SpeedCure EAQ provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% in UV and LED curable formulations.

SpeedCure EDB is an amine synergist of the aminobenzoate family. SpeedCure EDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations.

SpeedCure EHA is a liquid amine synergist of the aminobenzoate family. SpeedCure EHA generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations.

SpeedCure EMK is a Norrish Type II photoinitiator of the benzophenone family and an amine synergist, with absorption maxima at 250 and 378 nm. SpeedCure EMK provides high reactivity and depth cure when used at 0.5-5 wt% and combined with an amine synergist in highly pigmented UV and LED curable formulations.

SpeedCure MBB is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 246 nm. SpeedCure MBB provides surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations.

SpeedCure MBF is a liquid Norrish Type II photoinitiator of the benzoylformate family, with an absorption maximum at 244 nm. SpeedCure MBF provides very low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations.

SpeedCure MBP is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 259 nm. SpeedCure MBP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations.

SpeedCure PBZ is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 290 nm. SpeedCure PBZ provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure PDO is a Norrish Type I photoinitiator from the oxime ester family, with absorption maximum at 259 nm. SpeedCure PDO provides high reactivity, low yellowing and low volatiles when used at 0.5-5 wt% in UV formulations for electronics applications.

SpeedCure TPO is a Norrish Type I photoinitiator from the phosphine oxide family, with absorption maxima at 267, 298 and 380 nm. SpeedCure TPO provides high reactivity and depth cure when used at 0.5-5 wt% in UV and LED curable formulations.

SpeedCure TPO-L is a liquid Norrish Type I photoinitiator from the phosphine oxide family, with absorption maxima at 274, 290 and 370 nm. SpeedCure TPO-L provides high reactivity and depth cure when used at 0.5-5 wt% in UV and LED curable formulations.

SpeedCure VLT is a titanocene photoinitiator with absorption maxima at 395 nm and 470 nm. SpeedCure VLT provides high reactivity and depth curing when used at 0.5-5% in UV, LED and visible light curable formulations. SpeedCure VLT also acts as an effective sensitizer for diaryliodonium type cationic photoinitiators and can therefore be used to promote cure of cationic formulations with visible light.

SpeedCure XFs is a formulation of difunctional and monofunctional Norrish Type I photoinitiators from the hydroxyacetophenone family, with an absorption maximum at 252 nm. SpeedCure XFs provides low yellowing, surface cure and increased reactivity when used at 0.5-5 wt% in UV curable formulations.

SpeedCure XFs01 is a difunctional Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 258 nm. SpeedCure XFs01 provides low yellowing, surface cure and high reactivity when used at 0.5-5 wt% in UV curable formulations.

New generation of bio-based dispersant
1. Used as dispersant:
High performance to disperse all minerals used in the paper industry, coarse clays and calcium carbonates even TiO2
High stability.
2. Used as additive:
Allow homogeneous dispersion of your coating colors
Decrease high shear viscosities to limit scratches and streaks
Reduce aggregates significantly to avoid / prevent filtration issues.

SR203 NS, tetrahydrofurfuryl methacrylate, is a low viscosity, polar monofunctional monomer which contains a cyclic group. It promotes adhesion to numerous substrates.

SR203T NS, tetrahydrofurfuryl methacrylate, is a low viscosity, polar monofunctional monomer which contains a cyclic group. It promotes adhesion to numerous substrates.

SR205 NS, triethylene glycol dimethacrylate, is a high boiling monomer with low vapor pressure which is used in free radical polymerization.

SR205H is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR205M NS, triethylene glycol dimethacrylate, is a high boiling monomer with low vapor pressure which is used in free radical polymerization.

SR206 is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR206 NS, ethylene glycol dimethacrylate, is a colorless, high boiling difunctional monomer for use in free radical polymerization.

SR210 NS, polyethylene glycol dimethacrylate, is a low viscosity difunctional monomer with low vapor pressure and fast cure response for use in free radical polymerization. Response for use in free radical polymerization.

SR210CG is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing coatings applications or as a co-monomer for polymer synthesis.

SR210HH is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis.

SR210OP NS is a low viscosity difunctional monomer with low vapor pressure and fast cure response for use in free radical polymerization.

SR211 NS, polyethylene glycol dimethacrylate, is a low viscosity difunctional monomer with low vapor pressure and fast cure response for use in free radical polymerization.

SR214 is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis.

SR214 NS, 1, 4-butanediol dimethacrylate, is a low viscosity, difunctional monomer offering high solvency.

SR217 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR217 NS is a low viscosity aliphatic monofunctional monomer for use in UV/EB coating and ink formulations. SR217 NS improves adhesion to plastics, metals, and other difficult substrates.

SR218 NS is a low viscosity monofunctional monomer for use in UV/EB coating, inks, and adhesive formulations. SR218 NS improves adhesion to plastics, metals, and other difficult substrates.

SR 228 NS is a moderate viscosity acrylate monomer that exhibits a high glass transition temperature (Tg). When formulated into UV/EB and 1K and 2K chemically cured coatings, adhesives and composites, SR228 NS improves hardness, shear adhesion, and heat resistance.

SR231 NS, diethylene glycol dimethacrylate, is a high boiling monomer with low vapor pressure, which is used in free radical polymerization.

SR238 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR238 NS, 1, 6-hexanediol diacrylate, is a low viscosity, fast curing monomer with low volatility, a hydrophobic backbone, and good solvency for use in free radical polymerization.

SR238TFN, 1, 6-hexanediol diacrylate, is a low viscosity, fast curing monomer with low volatility, a hydrophobic backbone, and good solvency for use in free radical polymerization.

SR238 TFN., 1, 6-hexanediol diacrylate, is a low viscosity, fast curing monomer with low volatility, a hydrophobic backbone, and good solvencyfor use in free radical polymerization.

SR239 NS, 1, 6-hexanediol dimethacrylate, is a low viscosity, fast curing monomer with low volatility, a hydrophobic backbone, and good solvency for use in free radical polymerization.

SR239A NS, 1, 6-hexanediol dimethacrylate, is a low viscosity, fast curing monomer with low volatility, a hydrophobic backbone, and good solvency for use in free radical polymerization.

SR289CG is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing coatings applications.

SR239EU is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR252 is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis.

SR252 NS is a water soluble difunctional monomer that produces soft, flexible films. In particular, it is used for adhesives, anaerobic adhesives, coatings, plastisols and sealants.

SR252LC NS is a water soluble difunctional monomer that produces soft, flexible films. In particular, it is used for adhesives, anaerobic adhesives, coatings, plastisols and sealants.

SR252OP NS is a water soluble difunctional monomer that produces soft, flexible films. In particular, it is used for adhesives, anaerobic adhesives, coatings, plastisols and sealants.

SR256 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR256 NS is a slightly water dispersible, monofunctional monomer which acts as a reactive diluent.

SR257C is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR259 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR259 NS, polyethylene glycol (200) diacrylate, is a low volatility monomer which produces soft, flexible free-radically cured flexible films.

SR262 NS, methacrylate monomer. It is a low viscosity, fast curing monomer with low volatility, a hydrophobic backbone, and good flexibility when used in free radical polymerization.

SR262TFN, methacrylate monomer. It is a low viscosity, fast curing monomer with low volatility, a hydrophobic backbone, and good flexibility when used in free radical polymerization.

SR285 NS, tetrahydrofurfuryl acrylate, is a low viscosity, polar, monofunctional monomer, which contains a cyclic group. It promotes adhesion to numerous substrates.

SR285TFN., tetrahydrofurfuryl acrylate, is a low viscosity, polar, monofunctional monomer, which contains a cyclic group. It promotes adhesion to numerous substrates.

SR285TFN, tetrahydrofurfuryl acrylate, is a low viscosity, polar, monofunctional monomer, which contains a cyclic group. It promotes adhesion to numerous substrates.

SR285T NS., tetrahydrofurfuryl acrylate, is a low viscosity, polar, monofunctional monomer, which contains a cyclic group. It promotes adhesion to numerous substrates.

SR295 is a tetrafunctional acrylic monomer for use in UV/LED and EB curing applications.

SR295 NS is a tetrafunctional acrylic monomer for use in UV/LED and EB curing applications.

SR306 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR306 MB is the Mass Balance version of SR306 with a Bio-attributed content of 40%. It allows a significant reduction of the product carbon footprint compared to its fossil version. SR306 MB achieves exactly the same performance as SR306 and can be readily used and implemented as a direct drop-in.

SR306 NS, tripropylene glycol diacrylate, is a low volatility, low-viscosity monomer for use in free radical polymerization.

SR306TFN, tripropylene glycol diacrylate, is a low volatility, low-viscosity monomer for use in free radical polymerization.

SR306K NS, tripropylene glycol diacrylate, is a low volatility, low-viscosity monomer for use in free radical polymerization.

SR313 NS, lauryl methacrylate, is a low volatility monofunctional monomer with a long chain aliphatic hydrophobic backbone.

SR313A is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis.

SR313B NS, C12 C14 alkyl methacrylate, is a low volatility monofunctional monomer with a long chain aliphatic hydrophobic backbone.

SR324 is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis.

SR335 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR339 NS, 2-phenoxyethyl acrylate, is a low volatility monofunctional, aromatic monomer that offers good adhesion properties.

SR339 NS is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR339C is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR340 NS, 2-phenoxyethyl methacrylate, is a low volatility monofunctional, aromatic monomer which offers good adhesion properties.

SR341 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR344 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR344D NS, polyethylene glycol (400) diacrylate, is a low skin irritation, water-soluble monomer that produces soft, flexible free-radically cured flexible films.

SR348 NS is a high viscosity 2 mole ethoxylated bisphenol A dimethacrylate used as coagent in peroxide or EB curing. It has a fast cure response, a very low volatility, and a high boiling point. SR348 NS provides good chemical and heat resistance properties. It is recommended in anaerobic adhesives and resin injection.

SR348C is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR348L NS is a high viscosity 2 mole ethoxylated bisphenol A dimethacrylate used as coagent in peroxide or EB curing. It has a fast cure response, a very low volatility, and a high boiling point. SR348L NS provides good chemical and heat resistance properties. It is recommended in anaerobic adhesives and resin injection.SR348 NS provides good chemical and heat resistance properties. It is recommended in anaerobic adhesives and resin injection.

SR348OP NS is a high viscosity 2 mole ethoxylated bisphenol. A dimethacrylate used as coagent in peroxide or EB curing. It has a fast cure response, a very low volatility, and a high boiling point. SR348OP NS provides good chemical and heat resistance properties. It is recommended in anaerobic adhesives and resin injection.

SR349 is a difunctional acrylic monomer for use in UV/LED and EB curing applications.

SR349 NS, 3 mole ethoxylated bisphenol A diacrylate, is a low skin irritation, low odor, low volatility monomer used in free radical polymerization. It has a hydrophobic backbone for complete alkali solubility.

SR350 NS, trimethylolpropane trimethacrylate, is a low volatility trifunctional monomer offering fast cure response in free radical polymerization.

SR350CG is a trifunctional methacrylic monomer for use in UV/LED/EB and peroxide curing coatings applications.

SR350D is a trifunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR350DD NS, trimethylolpropane trimethacrylate, is a low volatility trifunctional monomer offering fast cure response in free radical polymerization.

SR350HS NS, trimethylolpropane trimethacrylate, is a low volatility trifunctional monomer offering fast cure response in free radical polymerization.

SR350LC NS, trimethylolpropane trimethacrylate, is a low volatility trifunctional monomer offering fast cure response in free radical polymerization.

SR350R NS, trimethylolpropane trimethacrylate, is a low volatility trifunctional monomer offering fast cure response in free radical polymerization.

SR350S NS is a trifunctional methacrylic monomer which is a coagent in peroxide or E.B. curing. This has been the workhorse of the peroxide cure elastomer industry for the last 20 years. SR350S NS is used in PVC plastisols, plastics and many elastomers including CPE, EPDM, nitrile, CPE and silicones. It contains a scorch retarding inhibitor package.

SR351 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications.

SR351 NS, trimethylolpropane triacrylate (TMPTA), is a low viscosity, low volatility liquid monomer which offers fast cure response and low volatility during free-radical polymerization.

SR351TFN, trimethylolpropane triacrylate (TMPTA), is a low viscosity, low volatility liquid monomer which offers fast cure response and low volatility during free-radical polymerization.

SR355 is a tetrafunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR355 NS, ditrimethylolpropane tetraacrylate, is a low skin irritation tetrafunctional monomer offering fast cure response and a high crosslink density upon curing.

SR355TFN, ditrimethylolpropane tetraacrylate, is a low skin irritation tetrafunctional monomer offering fast cure response and a high crosslink density upon curing.

SR368 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications.

SR368 NS, tris (2-hydroxy ethyl) isocyanurate triacrylate, is a white solid triazin compound, which is used in free radical polymerization.

SR368D NS, tris (2-hydroxy ethyl) isocyanurate triacrylate, is a clear liquid triazin compound, which is used in free radical polymerization.

SR395 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR395 NS, isodecyl acrylate, is a monofunctional, hydrophobic monomer.

SR395 NS  is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR399 is a hexafunctional acrylic monomer for use in UV/LED and EB curing applications.

SR399 NS, dipentaerythritol pen-taacrylate, combines abrasion resistance with hardness and fast cure response for ultraviolet and electron beam curing. It is a low skin irritation monomer.

SR399LV NS, low viscosity dipentaerythritol pen-taacrylate, combines abrasion resistance with hardness and fast cure response for ultraviolet and electron beam curing. It is a low skin irritation monomer.

SR420 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR420 NS is a very low viscosity monofunctional monomer that brings high Tg and low shrinkage to UV/EB inks, adhesives, and plastic coatings.

SR421A is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis.

SR421A NS is a low viscosity, monofunctional methacrylate monomer containing a light stable cyclic group. It has excellent solvency characteristics and good adhesion to a variety of substrates. SR421A NS demonstrates improved thermal stability.

SR423 NS, isobornyl methacrylate, is an excellent reactive diluent for oligomers. The cyclic group produces polymers through free radical curing that have a high glass transition temperature.

SR444 NS, pentaerythritol triacrylate, which contains a pendant hydroxyl group, is a low volatile, fast curing monomer for use in free radical polymerization.

SR444D NS, pentaerythritol triacrylate, which contains a pendant hydroxyl group, is a low volatile, fast curing monomer for use in free radical polymerization.

SR444F is a trifunctional acrylic monomer for use in UV/LED and EB curing coatings applications.

SR454 is a trifunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR454 MB is the Mass Balance version of SR454 with a Bio-attributed content of 43%. It allows a significant reduction of the product carbon footprint compared to its fossil version. SR454 MB achieves the same performance as SR454 and can be readily used and implemented as a direct drop-in.

SR454 NS, 3 mole ethoxylated trimethylolpropane triacrylate, is a low skin irritation, fast curing monomer for use in free radical polymerization.

SR454TFN, 3 mole ethoxylated trimethylolpropane triacrylate, is a low skin irritation, fast curing monomer for use in f ree radical polymerization.

SR454A NS, 3 mole ethoxylated trimethylolpropane triacrylate, is a low skin irritation, fast curing monomer for use in free radical polymerization.

SR454D NS, 3 mole ethoxylated trimethylolpropane triacrylate, is a low skin irritation, fast curing monomer for use in free radical polymerization.

SR455 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications.

SR480 NS, 10 mole ethoxylated bisphenol A dimethacrylate is a low odor, low volat ility monomer used in free radical polymerization.

SR484 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR489 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR492 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications.

SR492 NS, 3 mole propoxylated trimethylolpropane triacrylate, is a low skin irritation, fast curing monomer for use in free radical polymerization.

SR492TFN, 3 mole propoxylated trimethylolpropane triacrylate, is a low skin irritation, fast curing monomer for use in free radical polymerization.

SR494 is a tetrafunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR494 NS, alkoxylated pentaerythritol tetraacrylate, is a heat resistant, fast curing tetrafunctional monomer for use in UV/EB polymerization. It is a low skin irritation monomer.

SR495B NS, caprolactone acrylate, is a low skin irritation, low volatility, low odor, monofunctional monomer for use in UV/EB or cationic curing.

SR499 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications.

SR499 NS, 6 mole ethoxylated trimethylolpropane triacrylate, is a low skin irritation, fast curing monomer for use in free radical polymerization.

SR502 NS, 9 mole ethoxylated trimethylolpropane triacrylate, is a low skin irritation, fast curing monomer for use in free radical polymerization.

SR504 NS, ethoxylated nonyl-phenol acrylate, is a low odor, low volatility and low skin irritation monomer for use in UV/EB polymerization.

SR506 NS, isobornyl acrylate, is an excellent reactive diluent for oligomers. The cyclic group produces polymers through free radical curing that have a high glass transition temperature.

SR506A NS, isobornyl acrylate, is an excellent reactive diluent for oligomers. The cyclic group produces polymers through fre e radical curing that have a high glass transition temperature.

SR506EG NS, isobornyl acrylate, is an excellent reactive diluent for oligomers. The cyclic group produces polymers through free radical curing that have a high glass transition temperature.

SR506HP NS, isobornyl acrylate, is an excellent reactive diluent for oligomers. The cyclic group produces polymers through free radical curing that have a high glass transition temperature.

SR508 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR508 MB is the Mass Balance version of SR508 with a Bio-attributed content of 50%. It allows a significant reduction of the product carbon footprint compared to its fossil version. SR508 MB achieves exactly the same performance as SR508 and can be readily used and implemented as a direct drop-in.

SR508 NS, dipropylene glycol diacrylate, is an excellent low viscosity, economical diluent that can replace hexane diol diacrylate in most applications.

SR508TFN, dipropylene glycol diacrylate, is an excellent low viscosity, economical diluent that can replace hexane diol diacrylate in most applications.

SR531 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications.

SR531 NS is a low viscosity monofunctional acrylate monomer that is used in a variety of UV/EB-cured applications, including inks, wood coatings, stereo-lithography and photopolymer printing plates. SR531 NS is tough, flexible, non-yellowing, and imparts adhesion to a variety of substrates.

SR531TFN is a low viscosity monofunctional acrylate monomer that is used in a variety of UV/EB-cured applications, including inks, wood coatings, stereo-lithography and photopolymer printing plates. SR531TFN is tough, flexible, non-yellowing, and imparts adhesion to a variety of substrates.

SR531T NS.is a low viscosity monofunctional acrylate monomer that is used in a variety of UV/EB-cured applications, including inks, wood coatings, stereo-lithography, and photopolymer printing plates. SR531T NS. is tough, flexible, non-yellowing, and imparts adhesion to a variety of substrates.

SR540 is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR540 NS ethoxylated (4) bisphenol A diimethacrylate is a low volatility monomer used in free radical polymerization. It provides a good hydrophobic and hydrophilic balance.

SR548 is a monofunctional methacrylic monomer for use in UV/LED and EB curing coatings applications or as a co-monomer for polymer synthesis.

SR550 is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis.

SR551 NS is a monofunctional methoxylated PEG (350) acrylate monomer that features excellent wetting, high flexibility, low Tg, and fast surface cure.

SR551EU is a monofunctional methoxy polyethyleneglycol acrylate monomer for use in copolymerization and UV/LED/EB curing applications.

SR552 is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis.

SR578 NS is an acrylate monomer that exhibits low odor with high reactivity. SR578 NS is useful in applications, such as coatings and digital and screen inks, where outdoor weathering resistance is needed.

SR579 NS, acrylate blend, combines abrasion resistance with hardness and fast cure response for ultraviolet and electron beam curing. It is a low skin irritation monomer.

SR594 is a tetrafunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR601 NS, four mole ethoxylated bisphenol A diacrylate, is a low skin irritation, low odor, low volatility monomer used in free radical polymerization. It has a hydrophobic backbone for complete alkali solubility.

SR601J NS, four mole ethoxylated bisphenol A diacrylate, is a low skin irritation, low odor, low volatility monomer used in free radical polymerization. It has a hydrophobic backbone for complete alkali solubility.

SR602 NS, 10 mole ethoxylated bisphenol A diacrylate, is a low skin irritation, low odor; low volatility monomer used in free radical polymerization.It has a hydrophobic backbone for complete alkali solubility.

SR610 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR610 NS, polyethylene glycol (600) diacrylate, is a low skin irritation, water-soluble monomer that produces soft, flexible free-radically cured flexible films.

SR610TFN, polyethylene glycol (600) diacrylate, is a low skin irritation, water-soluble monomer that produces soft, flexible free-ra dically cured flexible films.

SR789 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications.

SR833 NS is a low viscosity difunctional acrylate monomer that is polymerized by free radicals. It can be used in a variety of UV/EB-cured applications where flexibility and adhesion are required. SR833 NS also demonstrates good film toughness and weathering characteristics.

SR833S is a difunctional acrylic monomer for use in UV/LED and EB curing applications.

SR834 is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR834 NS is a difunctional methacrylic monomer designed for a wide variety of applications.

SR834VSP NS is a difunctional methacrylic monomer designed for a wide variety of applications.

SR855 NS, ditrimethylolpropane acrylates is a low skin irritation tetrafunctional monomer offering fast cure response and a high crosslink density upon curing.

SR899 B NS, acrylated dipentaerythritol, combines abrasion resistance with hardness and fast cure response for ultraviolet and electron beam curing. It is a low skin irritation monomer.

SR899 C NS, acrylated dipentaerythritol, combines abrasion resistance with hardness and fast cure response for ultraviolet and electron beam curing. It is a low skin irritation monomer.

SR899 F NS, acrylated dipentaerythritol, combines abrasion resistance with hardness and fast cure response for ultraviolet and electron beam curing. It is a low skin irritation monomer.

SR899 F TFN, acrylated dipentaerythritol, combines abrasion resistance with hardness and fast cure response for ultraviolet and electron beam curing. It is a low skin irritation monomer.

SR899 NS, dipentaerythritol acrylates, combines abrasion resistance with hardness and fast cure response for ultraviolet and electron beam curing. It is a low skin irritation monomer.

SR900TFN, is a low viscosity, low volatility liquid monomer which offers fast cure response and low volatility during free-radical polymerization.

SR9003 is a difunctional acrylic monomer for use in UV/LED and EB curing applications.

SR9003 NS, propoxylated neopentyl glycol diacrylate, is a low viscosity, low skin irritation monomer for use in free radical polymerization.

SR9003TFN, propoxylated neopentyl glycol diacrylate, is a low viscosity, low skin irritation monomer for use in free radical polymerization.

SR901 NS is a specialty acrylate. The acrylate possesses moderate abrasion resistance and chemical resistance.

SR9020 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications.

SR9020 MB is the Mass Balance version of SR9020. It combines both bio-segregated and mass balance approaches with a total bio-content of 57% (14% coming from a bio-segregated feedstock and 43% being bio-attributed). It allows a significant reduction of the product carbon footprint compared to its segregated equivalent SR9020.SR9020 MB achieves exactly the same performance as SR9020 and can be readily used and implemented as a direct drop-in.

SR9020 NS, 3 mole propoxylated glyceryl triacrylate is a trifunctional monomer offering low viscosity, good flexibility, fast curing, and excellent hardness.

SR9020TFN, 3 mole propoxylated glyceryl triacrylate is a trifunctional monomer offering low viscosity, good flexibility, fast curing, and excellent hardness.

SR9020B TFN, 3-mole propoxylated glyceryl triacrylate is a trifunctional monomer offering low viscosity, good flexibility, fast curing, and excellent hardness.

SR9035 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications.

SR9049 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications.

SUPER GELKYD® 3915 WDA 55 is a thixotropic resin, based on urethane-urea technology and has been developed for imparting thixotropy into interior and exterior decorative coatings. The resin is supplied in low aromatic high flash white spirit to enable the formulation of coatings that do not require adverse environmental labelling. SUPER GELKYD® 3915 WDA 55 should be used at levels between 15 & 50% calculated on total solid binder to achieve a wide range of thixotropy ranging from slightly structured to full gel. It is suitable for use in all types of interior and exterior solvent based decorative coatings. High quality alkyds thinned in low aromatic high flash solvent should be used in combination with SUPER GELKYD® 3915 WDA 55 to maximise the advantages of the low aromatic solvent.

SUPER GELKYD® 3920 WDA 49 is a urethane - urea modified thixotropic alkyd that has been developed for use in decorative coatings, especially exterior woodstains. It can be used as sole binder for high structured systems and in combination with long or medium oil alkyds. The resin is supplied in low aromatic high flash white spirit to enable the formulation of coatings that do not require adverse environmental labelling. SUPER GELKYD® 3920 WDA 49 can be formulated with polar solvents, alkyds (whatever their polarity) and a wide range of difficult pigments, which are not compatible with polyamide-based products.

SUPER GELKYD® 4743 WP 90 is a high solids thixotropic resin, based on urethane-urea technology and has been developed for imparting thixotropy to interior and exterior decorative coatings. SUPER GELKYD® 4743 WP 90 is supplied in isoparaffinic solvent to enable the formulation of low odour coatings that do not require adverse environmental labelling; it is designed for use in the formulation of decorative paints and woodstains that meet the 2010 VOC limits set in European Directive 2004/42/CE. SUPER GELKYD® 4743 WP 90 is highly thixotropic and should be used in combination with a high solids alkyd, at levels between 15 & 50% calculated on total solid binder to achieve a wide range of thixotropy ranging from slightly structured to full gel.

SUPER GELKYD® 6006 WDA 55 is a highly structured thixotropic flexible resin, based on urethane-urea technology and has been especially developed for imparting thixotropy into exterior, highly durable decorative coatings. The resin is supplied in low aromatic high flash white spirit to enable the formulation of coatings that do not require adverse environmental labelling. SUPER GELKYD® 6006 WDA 55 should be used at levels between 15 & 50% calculated on total solid binder to achieve a wide range of thixotropy ranging from slightly structured to full gel. It is suitable for use in all types of exterior solvent-based decorative coatings. It is especially recommended for use in combination with the flexible alkyd SYNOLAC® 6005 WDA 70 to produce extremely durable exterior coatings.

SUPER GELKYD® 6008 WD 45 is a pumpable thixotropic alkyd especially designed for use in high durability exterior coatings. It combines the proven durability of SYNOLAC® 6005 WDA 70 with the rheological control of the SUPER GELKYD® technology. The result is a flexible thixotropic resin supplied in bulk that can be used as sole binder or alternatively blended with SYNOLAC® 6005 WDA 70. The resin is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling. SUPER GELKYD® 6008 WD 45 can be formulated with polar solvents, alkyds (whatever their polarity) and a wide range of difficult pigments, which are not compatible with polyamide-based products. The resin is primarily recommended for use in thixotropic exterior decorative coatings woodstains, where it may be incorporated as the major proportion of the binder according to the structure required.

SYNAQUA® 2070 is a medium oil alkyd emulsion designed for use in decorative paints. SYNAQUA® 2070 has been developed primarily for use in interior undercoats formulations. However, it is also suitable for other applications such as matt paints, exterior primers for wood, woodstains or metal and corrosion resistant primers. SYNAQUA® 2070 is designed to get coatings with similar application properties to solvent based alkyds but with low VOC in the finished product, with an improved wet-edge time. SYNAQUA® 2070 does not contain any alkylphenolethoxylates nor amines.

SYNAQUA® 2080 is a short oil alkyd emulsion designed for use in high performance decorative paints. SYNAQUA® 2080 is suitable for the formulation of low to zero-VOC wall paints and might be used in the formulation of trim paints. SYNAQUA® 2080 is formulated without alkylphenolethoxylates, and is ammonia-, solvent- and plasticizer- free.

SYNAQUA® 2090 is a short oil alkyd emulsion designed to be formulated without Cobalt drier. SYNAQUA® 2090 has been developped for the formulation of high gloss and semi-gloss wall and trim paints. SYNAQUA® 2090 is formulated without alkylphenolethoxylates, and is ammonia-, solvent- and plasticizer- free.

SYNAQUA® 2350 EP 60 is a highly flexible acrylated epoxy ester. It can be used in both water-dilutable or solvent-based 1K systems (curing at room temperature or stoving, with or without the presence of amino resins). SYNAQUA® 2350 EP 60 is recommended for use in both industrial primers and topcoats.

SYNAQUA® 3510 SW 80 is an after neutralisation water-reducible, saturated, hydroxyfunctional, modified polyester, designed especially for cross-linking with water emulsifiable polyisocyanates. Finished coatings particularly show an excellent film surface comparable with the well-known quality of solvent based 2K-PU coatings. Additionally the mechanical characteristics and durability are also comparable. SYNAQUA® 3510 SW 80 is suitable to formulate high gloss, flexible finish coatings with less than 5% VOC. Favourably such paints can safely be worked on all commonly used modern coating equipment. SYNAQUA® 3510 SW 80 is particularly recommended for use in high gloss 2-pack-coatings for industrial application. It is also suitable for primers and single coat paints. The high durability and long pot life give the opportunity for coating large vehicles. Even for wood coating these characteristics can be exploited using corresponding formulations.

SYNAQUA® 4804 is a short oil alkyd emulsion designed for use in high performance decorative paints. SYNAQUA® 4804 has been developed primarily for trim paints. The properties of the emulsion make it also suitable for other applications such as wall paints, exterior primers for wood or metal, direct to metal and corrosion resistant primers. SYNAQUA® 4804 is formulated without alkylphenolethoxylates, and is ammonia-, solvent- and plasticiser- free.

SYNAQUA® 4804 NA is a short oil alkyd emulsion designed for high performance low yellowing decorative coatings. SYNAQUA® 4804 NA is low VOC capable but provides performance similar to solvent-based alkyds. It is dedicated to interior and exterior trim paints, interior wall paints and metal primers. SYNAQUA® 4804 NA is APEO-, ammonia-, solvent- and plasticizer- free.

SYNAQUA® 4856 is a highly bio-based alkyd emulsion. It is particularly dedicated for the formulation of low VOC and low emissive interior wall paints from matte to glossy. SYNAQUA® 4856 offers a good wet scrub resistance, a good hardness and a high gloss potential. SYNAQUA® 4856 is formulated without alkylphenolethoxylates, and is ammonia- and plasticiser- free.

SYNAQUA® 5120 BG 72 is an alcali-soluble short oil alkyd resin based on drying vegetables fatty acids, specially suited to combine with HMMM resins. SYNAQUA® 5120 BG 72 is a resin recommended in combination with water reducible amino resins for the formulation of industrial primers and enamels for stoving systems.

SYNAQUA® 6812 is a self emulsifying long oil alkyd resin designed for use in water based decorative coatings, in combination with (styrene-)acrylic or vinylic emulsions. SYNAQUA® 6812 is to be used as co-binder in the formulation of 2010 VOC compliant paints and primers (according to the European Directive 2004/42/CE) in combination with (styrene-) acrylic or vinylic emulsions. In matt paints and primers, it can substitute up to 30% of the (styrene-) acrylic or vinylic binder. In lower PVC paints, the level should not exceed 10% to 20%. SYNAQUA® 6812 does not contain any solvent, amines nor alkylphenolethoxylates.

SYNAQUA® 811 S 48 is an aqueous solution of a high molecular weight acrylic polymer, developed for use in water-soluble stoving systems. When used at low concentrations, it is effective in eliminating cissing and a related effect in deposited films, and is particularly recommended where water based coatings are applied to slightly greasy surfaces.

SYNAQUA® 8574 S 70 is a high solids chain-stopped water reducible alkyd with fast through-dry, and good gloss and corrosion resistance for use in air-dry metal auto OEM, agricultural, heavy equipment, and appliance coatings.

SYNAQUA® 8577 is a fast dry short oil chain stopped acrylic modified alkyd dispersion designed for low VOC architectural and industrial applications. SYNAQUA® 8577 is suitable for very low HAPs applications. SYNAQUA® 8577 does not contain any surfactants or plasticizers.

SYNAQUA® 8591 S 75 is a high solids chain-stopped soya short oil alkyd with good gloss and corrosion resistance for use in metal primers, one-coat industrial, and agricultural coatings.

SYNAQUA® 8597 S 70 is a high solids chain-stopped TOFA short oil alkyd with good gloss and corrosion resistance for use in metal primers, one-coat industrial, and agricultural coatings.

SYNAQUA® 8953 BE 70 is a high solids water-reducible styrene-modified soya epoxy ester with good corrosion and humidity resistance, for use in auto OEM underhood and industrial metal primers. Good corrosion and humidty resistance. Compatible with melamine/urea formaldehyde resins, water reducible resins and acrylic emulsions

SYNAQUA® 9511 is an acrylic polyol emulsion designed for 2K and for 1K stoving systems. It can be used for plastic and metal applications.

SYNAQUA® 9544 BA 75 is a carboxyl functional, thermosetting water reducible acrylic with excellent flexibility, solvent resistance, gloss, and impact resistance.

SYNAQUA® 9802 is a water-reducible polyester resin with good flexibility, high hardness, rapid cure response, excellent color and gloss retention, good solubility in water and co-solvent, and good hydrolytic stability. SYNAQUA® 9802 is intended for general industrial metal coatings and lithographic inks.

SYNAQUA® 9817 BE 75 is a high solids carboxyl and hydroxyl functional, water-reducible, thermosetting polyester resin with excellent pigment wetting, and good over-bake resistance, humidity resistance, and gloss retention. SYNAQUA® 9817 BE 75 is used in ink, decorative metal coatings, and can coatings.

SYNOCRYL® 7616 S 50 is a thermoplastic acrylic resin with an excellent adhesion over many different metallic substrates like steel, galvanised steel, brass, aluminium… SYNOCRYL® 7616 S 50 is recommended for primers and monolayer paints with good adhesion over “light metals” and galvanised steel exhibiting good outdoor resistance. It is also suitable for maintenance paints with good adhesion over many differing metallic substrates and plastics.

SYNOCRYL® 806S-70 is hydroxyl functional thermosetting flexible acrylic resin. SYNOCRYL® 806S-70 is a thermosetting hydroxylated acrylic copolymer for combination with amino resins. Suitable for Basecoat for wet on wet systems especially automotive topcoats. Good compatibility with cellulose acetate-butyrate resins.

SYNOCRYL® 816N-70 is hydroxyl functional thermosetting acrylic resin developed for use in wet on wet application of auto body topcoats and lacquers. SYNOCRYL® 816N-70 is recommended for the development of the acrylic based OEM, General Industrial and vehicle refinish lacquers or paints having excellent overall performance. Particular performance characteristics achieved with SYNOCRYL® 816N-70 include:

SYNOCRYL® 826S-60 IN is hydroxyl functional thermosetting acrylic resin developed for use in low bake stoving system for auto body paints and lacquers. SYNOCRYL® 826S-60 IN is recommended for the development of the acrylic based General Industrial, OEM and vehicle refinish lacquers or paints having excellent overall performance.

SYNOCRYL® 829S-60 is hydroxyl functional thermosetting acrylic resin developed for use in low bake stoving system for auto body paints and lacquers. SYNOCRYL® 829S-60 is recommended for the development of the acrylic based OEM, Industrial and vehicle refinish applications having excellent Petrol and oil resistance. Particular performance characteristics achieved with SYNOCRYL® 829S-60 include:

SYNOCRYL® 846S-60 is hydroxyl functional thermosetting CAB compatible acrylic resin. SYNOCRYL® 846S-60 is a thermosetting hydroxylated acrylic copolymer for crosslinking with amino resins. Suitable for Basecoat for wet on wet systems especially automotive topcoats. Good compatibility with cellulose acetate-butyrate resins.

SYNOCRYL® 873S-45 is a thermoplastic acrylic copolymer possessing the excellent color, gloss retention and good adhesion to plastics, metals, wood and fabrics are the properties of resin.

SYNOCRYL® 874 X 50 MY is a thermoplastic acrylic copolymer possessing the excellent colour, gloss retention and exterior durability properties typical of this class of resin. The acrylic monomers used in the manufacture of SYNOCRYL® 874 X 50 MY were selected to provide hard and tough films, yet with sufficient plasticising character to maintain flexibility. The versatility of SYNOCRYL® 874 X 50 MY enables it to be used in a variety of finishes, either as the sole vehicle in clear or pigmented coatings for metal, wood, plastic and fabrics or as a modifying resin to improve the drying time, durability and resistance properties of other coating systems. Water white films are deposited from the resin, and clear or pigmented films possess fast air dry times and are resistant to soaps and detergents. The films are also resistant to degradation when exposed to heat or ageing. They are far superior to chlorinated rubber based systems in terms of colour retention.

SYNOCRYL® 874N-40 IN is a thermoplastic acrylic copolymer possessing the excellent color, gloss retention and good adhesion to plastics, metals, wood and fabrics are the properties of resin.

SYNOCRYL® 874X-45 is a thermoplastic acrylic copolymer possessing the excellent color, gloss retention and good adhesion to plastics, metals, wood and fabrics are the properties of resin.

SYNOCRYL® 9122X-40 IN is a solution of a thermoplastic acrylic polymer used in a variety of specialized air drying and force drying finishes.

SYNOCRYL® 9130 X 55 is a thermoplastic acrylic resin with an excellent adhesion over many different metallic substrates like steel, galvanised steel, brass, aluminium… SYNOCRYL® 9130 X 55 is recommended for primers and monolayer paints with good adhesion over light industrial metals and galvanised steel exhibiting good outdoor resistance. It is also suitable for maintenance paints with good adhesion over many differing metallic substrates and plastics.Additionally, SYNOCRYL® 9130 X 55 can also be an excellent alternative to medium oil alkyds for metal decoration, especially in the case of galvanised steel substrates.

SYNOCURE® 210 BA 40 is designed for use in extremely fast drying coatings for industrial wood finishing. SYNOCURE® 210 BA 40 is specifically adapted to use in varnishes for industrial furniture finishing. SYNOCURE® 210 BA 40 quickly achieves a good blocking resistance and in spite of its relatively low hydroxyl value provides a good resistance to household chemicals. In combination with aliphatic polyisocyanates like Desmodur® N series (1) the coating film shows excellent drying and hardness without using CAB in the formulation.

SYNOCURE® 213 BA 50 is a fast drying, hydroxy functional acrylic resin designed to crosslink with polyisocyanates under ambient or force dry conditions. SYNOCURE® 213 BA 50 is specifically adapted to use in varnishes for industrial furniture finishing. SYNOCURE® 213 BA 50 quickly achieves a good blocking resistance and in spite of its relatively low hydroxyl value provides a good resistance to household chemicals.

SYNOCURE® 225 BA 50 is a hydroxy functional acrylic resin supplied in butyl acetate that will allow the formulation of aromatic-free systems. SYNOCURE® 225 BA 50 is particularly recommended for fast drying wood coatings but also suitable for industrial finishes and primers. SYNOCURE® 225 BA 50 is especially suitable for coatings in the furniture industry exhibiting excellent chemical resistance and mechanical properties. SYNOCURE® 225 BA 50 exhibits a faster hardening rate than similar resins resulting in early blocking resistance of the applied films under ambient or force dry conditions without compromising the good flexibility. The long pot life of the prepared mixture offers easy processing on all types of industrial coating equipment.

SYNOCURE® 225 BA 50 MY is a hydroxy functional acrylic resin supplied in butyl acetate that will allow the formulation of aromatic-free systems. SYNOCURE® 225 BA 50 MY is particularly recommended for fast drying wood coatings but also suitable for industrial finishes and primers. SYNOCURE® 225 BA 50 MY is especially suitable for coatings in the furniture industry exhibiting excellent chemical resistance and mechanical properties. SYNOCURE® 225 BA 50 MY exhibits a faster hardening rate than similar resins resulting in early blocking resistance of the applied films under ambient or force dry conditions without compromising the good flexibility. The long pot life of the prepared mixture offers easy processing on all types of industrial coating equipment.

SYNOCURE® 516 N 60 is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 516 N 60 is particularly well suited for use in high quality industrial coatings. The excellent adhesion properties make the resin a good choice for primers, fillers and single coat paints for a variety of substrates. Steel, galvanised steel, aluminium, wood, plastic and minerals can all be coated satisfactorily using coatings based on SYNOCURE® 516 N 60. SYNOCURE® 516 N 60 has particularly good resistance properties to solvents and chemicals and to exposure to weather and UV light, making it suitable for high quality anticorrosive protection and for long life decorative coatings, especially on structural steelwork.

SYNOCURE® 542 X 55 is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates, and is particularly recommended where economy in use is a major factor.

SYNOCURE® 561 X 60 is a hydroxyl functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 561 X 60 has particularly good resistance properties to solvents, suitable for anti-corrosive protection and for long life decorative coatings, especially on structural steelwork.

SYNOCURE® 570 X 65 is a hydroxyl functional acrylic resin developed for use in two component systems when cured with polyisocyanate. SYNOCURE® 570 X 65 is recommended for the formulations, and is particularly recommended where higher application solids and excellent exterior durability is required.

SYNOCURE® 589 S 75 is a high solids hydroxy functional acrylic resin suitable for the formulation of high build low VOC (below 420 g/l at spray viscosity) two-component coatings, both solid colours and clearcoats. SYNOCURE® 589 S 75 is recommended for high performance protective and marine finishes, A.C.E., transport and vehicle refinishing.

SYNOCURE® 7120 S 50 is a hydroxy acrylic resin crosslinkable with polyisocyanates. SYNOCURE® 7120 S 50 has been developed to be used in varnishes and lacquers for furniture performing fast drying and hardening even with aliphatic polyisocyanates. SYNOCURE® 7120 S 50 provides in blend with aliphatic polyisocyanates yellowing resistance films and therefore is suitable to be used in white lacquers for kitchen cabinet. SYNOCURE® 7120 S 50 permits the formulation of clear glossy finishes with excellent polishing.

SYNOCURE® 7715 S 60 is an hydroxy acrylic resin to be crosslinked with polyisocyanates with good adhesion on different metallic and plastic substrates (steel, galvanised steel, aluminium, tinplate, ABS, PVC, polyamide, etc.) SYNOCURE® 7715 S 60 is a resin specially designed for the formulation of varnishes and enamels exhibiting a very fast drying in combination with aliphatic isocyanates.

SYNOCURE® 801S-60 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 801S-60 is recommended for the formulations, which are cross-link at room temperature or force dried with poly isocyanate and is particularly recommended where weatherability is a major factor.

SYNOCURE® 802N-70 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 802N-70 is low hydroxyl fast drying acrylic recommended for the formulations of general industrial applications.

SYNOCURE® 803X-65 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate.

SYNOCURE® 804X-70 is a hydroxyl functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanate. It is particularly recommended for use in OEM’s, vehicle refinishing, A.C.E. and transport coatings and heavy duty coatings.

SYNOCURE® 810X-60 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 810X-60 is recommended for the formulations, which are cross-link at room temperature or force dried with poly isocyanate and is particularly recommended for general industrial and vehicle refinish applications.

SYNOCURE® 815S-65 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. Fast drying acrylic with high hardness suitable for wood, plastics, vehicle refinish & GI primer, clear & topcoats.

SYNOCURE® 851 S 60 is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. SYNOCURE® 851 S 60 is particularly recommended for use in vehicle refinishing, and for all high performance industrial applications where high quality is required.

SYNOCURE® 851S-60 IN is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. SYNOCURE® 851S-60 IN is particularly recommended for use in OEM, vehicle refinishing, and for all high performance industrial applications where high quality is required.

SYNOCURE® 852S-75 is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. SYNOCURE® 852S-75 is particularly recommended for use in vehicle refinishing, and for all high performance industrial applications where high quality is required.

SYNOCURE® 853 BA 80 is a high solids hydroxy functional acrylic resin designed for curing at both room temperature and under low bake conditions with suitable polyisocyanates. Ease of application, initial gloss and appearance make them suitable for many applications including ACE and general metal coatings. Coatings based on SYNOCURE® 853 BA 80 are faster drying than most other high solids types. The high solids/low viscosity character of SYNOCURE® 853 BA 80 allows low VOC coatings to be formulated even with conventional polyisocyanates. Depending upon formulation <420g/l at 23 seconds and <350g/l at 45 seconds are possible.

SYNOCURE® 854 BA 80 is a high solids hydroxy functional acrylic resin designed for curing at room temperature with suitable polyisocyanates. Suggested applications are protective, marine and maintenance coatings.

SYNOCURE® 854 BA 80 MY is a high solids hydroxy functional acrylic resin designed for curing at room temperature with suitable polyisocyanates. Suggested applications are protective, marine and maintenance coatings.

SYNOCURE® 857 X 60 is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates, and is particularly recommended where economy in use is a major factor.

SYNOCURE® 857S-60 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 857S-60 is recommended for the formulations, where economy in use is a major factor. Excellent flexibility is a key feature of SYNOCURE 857S-60.

SYNOCURE® 861 X 55 is a hydroxy functional acrylated polyester designed for crosslinking at both room temperature and low stoving temperatures with suitable polyisocyanates. SYNOCURE® 861 X 55 is primarily intended for use in vehicle refinishing applications, both as a medium for excellent primer surfacers and for finishing coats.

SYNOCURE® 862 X 60 is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates, and is particularly recommended where economy in use is a major factor.

SYNOCURE® 862 X 60 HV is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates, and is particularly recommended where economy in use is a major factor.

SYNOCURE® 862 X 60 MY is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates, and is particularly recommended where economy in use is a major factor.

SYNOCURE® 862X-55 IN is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 862X-55 IN is recommended for the formulations, where economy in use is a major factor.

SYNOCURE® 864 N 60 is a low hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates, and is particularly recommended where economy in use is a major factor, which is achieved through low isocyanate demand. SYNOCURE® 864 N 60 has excellent resistance to weathering so is particularly suited to low cost protective coating topcoats

SYNOCURE® 865 EEP 70 is a hydroxy functional acrylic resin developed for use in two component systems requiring higher application solids. SYNOCURE® 865 EEP 70 has exceptional resistance to exposure to weather and UV light. Coatings based on SYNOCURE® 865 EEP 70 have excellent durability and gloss retention, a feature normally associated with higher hydroxyl content acrylics which are consequently more expensive to use. It is particularly suitable to high quality topcoats for Protective coatings also ACE and Vehicle Refinishing.

SYNOCURE® 865-70 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 865-70 is recommended for the formulations, which are cross-link at room temperature with polyisocyanate and is particularly recommended where higher application solids and excellent exterior durability is required.

SYNOCURE® 866 EEP 75 is a high solids content hydroxy functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 866 EEP 75 is particularly well suited for use in high quality industrial coatings with good gloss and DOI. Such coatings also have exceptional exterior durability and gloss retention and are suitable for vehicle refinish, ACE or protective coatings.

SYNOCURE® 866 EEP 75 MY is a high solids content hydroxy functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 866 EEP 75 MY is particularly well suited for use in high quality industrial coatings with good gloss and DOI. Such coatings also have exceptional exterior durability and gloss retention and are suitable for vehicle refinish, ACE or protective coatings.

SYNOCURE® 867 BA 60 is a hydroxy functional acrylic designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 867 BA 60 is especially recommended for coatings where outdoor durability and resistant properties are of prime importance.

SYNOCURE® 867 BA 60 MY is a hydroxy functional acrylic designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 867 BA 60 MY is especially recommended for coatings where outdoor durability and resistant properties are of prime importance.

SYNOCURE® 867 S 57 MY is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates.

SYNOCURE® 867BA-60 IN is a hydroxy functional acrylic designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 867BA-60 IN is especially recommended for coatings where outdoor durability and resistant properties are of prime importance

SYNOCURE® 867S-60 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 867S-60 is recommended for the formulations, which are cross-link at room temperature or force dried with poly isocyanate and is particularly recommended where excellent all round performance is required.

SYNOCURE® 867SD-57 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 867SD-57 is recommended for the formulations, which are cross-link at room temperature or force dried with poly isocyanate and is particularly recommended where excellent all round performance is required.

SYNOCURE® 868S-60 IN is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 868S-60 IN is CAB compatible acrylic recommended for the formulations, which are cross-link at room temperature or force dried with poly isocyanate and is particularly recommended where highly flexible coating is required.

SYNOCURE® 869 X 52 is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates to produce coatings with outstanding colour retention and good chemical resistance. SYNOCURE® 869 X 52 is suitable for use in wood lacquers and high performance coatings for metal.

SYNOCURE® 870S-60 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 870S-60 is recommended for the formulations, which are cross-link at room temperature or force dried with poly isocyanate and is particularly recommended where excellent all-round performance is required.

SYNOCURE® 871 X 60 is a hydroxy functional acrylic resin designed to crosslink with polyisocyanates at room temperature. Paints and lacquers based on SYNOCURE® 871 X 60 are particularly suitable for coating plastic substrates.

SYNOCURE® 878 N 60 is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 878 N 60 is particularly well suited for use in high quality industrial coatings. The excellent adhesion properties make the resin a good choice for primers, fillers and single coat paints for a variety of substrates. Steel, galvanised steel, aluminium, wood, plastic and minerals can all be coated satisfactorily using coatings based on SYNOCURE® 878 N 60. SYNOCURE® 878 N 60 has good resistance properties to solvents and chemicals and to exposure to weather and UV light, making it suitable for high quality anti-corrosive protection and for long life decorative coatings, especially on structural steelwork.

SYNOCURE® 878 N 60 MY is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 878 N 60 MY is particularly well suited for use in high quality industrial coatings. The excellent adhesion properties make the resin a good choice for primers, fillers and single coat paints for a variety of substrates. Steel, galvanised steel, aluminium, wood, plastic and minerals can all be coated satisfactorily using coatings based on SYNOCURE® 878 N 60 MY. SYNOCURE® 878 N 60 MY has good resistance properties to solvents and chemicals and to exposure to weather and UV light, making it suitable for high quality anti-corrosive protection and for long life decorative coatings, especially on structural steelwork.

SYNOCURE® 878N-60 IN is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 878N-60 IN is recommended for the formulations, which are cross-link at room temperature with poly isocyanate and is particularly recommended where weatherability is a major factor.

SYNOCURE® 885 S 70 is an acrylic resin with functional acid groups capable of crosslinking with an epoxy hardener to produce high build isocyanate free two-pack coating systems. SYNOCURE® 885 S 70 is designed for use in vehicle refinishing, maintenance enamels or protective top-coats. Used with epoxy hardener (typical aliphatic multifunctional epoxy resins such as those based on sorbitol), excellent solvent resistance to facilitate recoating and spot repair can be achieved. High build finishes are a particular feature of paints based on this resin.

SYNOCURE® 886 S 70 is an acid functional acrylic resin designed to crosslink at room temperature with epoxy resins to give high solids content isocyanate-free two-pack coating systems. Coatings based on this resin are especially suitable for protection and maintenance in areas where rapid drying, hardness and abrasion resistance are required. SYNOCURE® 886 S 70 has been designed to react with economic bisphenol A type epoxies and still maintain good exterior durability.

SYNOCURE® 886 S 70 MY is an acid functional acrylic resin designed to crosslink at room temperature with epoxy resins to give high solids content isocyanate-free two-pack coating systems. Coatings based on this resin are especially suitable for protection and maintenance in areas where rapid drying, hardness and abrasion resistance are required. SYNOCURE® 886 S 70 MY has been designed to react with economic bisphenol A type epoxies and still maintain good exterior durability.

SYNOCURE® 887X-70 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 887X-70 is low hydroxyl fast drying acrylic recommended for the formulations of general industrial applications.

SYNOCURE® 888X-60 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 888X-60 is recommended for the formulations, which are cross-link at room temperature or force dried with poly isocyanate and is particularly recommended where excellent all round performance is required.

SYNOCURE® 890 S 55 is an acid functional acrylic resin for use with the epoxy copolymer curing agents SYNOCURE® 899 BA 60 or SYNOCURE® 899 BA 70 LM in isocyanate-free two pack coating systems. Two pack coating systems based on SYNOCURE® 890 S 55 are especially suitable for transport vehicles, agricultural equipment and high quality maintenance coatings.

SYNOCURE® 892 BA 70 is an multifunctional acrylic resin for use with the epoxy acrylic copolymer curing agent SYNOCURE® 899 BA 70 LM in high quality 2-component isocyanate-free industrial coatings. SYNOCURE® 892 BA 70 is recommended for the formulation of protective coatings, transport and agricultural paints and high quality maintenance finishes. SYNOCURE® 892 BA 70 / SYNOCURE® 899 BA 70 LM based coatings will exhibit significantly higher solids and film build than the well-proven SYNOCURE® 890 S 55 /SYNOCURE® 899 BA 60 system.

SYNOCURE® 895 S 55 is a flexible acid functional acrylic resin for use with the epoxy copolymer curing agents SYNOCURE® 899 BA 60 or SYNOCURE® 899 BA 70 LM in isocyanate-free two pack coating systems. Two pack coating systems based on blends of SYNOCURE® 890 S 55 and SYNOCURE® 895 S 55 are especially suitable for transport vehicles, agricultural equipment and high quality maintenance coatings.

SYNOCURE® 899 BA 60 is an epoxy acrylic copolymer curing agent designed specifically for use with the Arkema range of SYNOCURE® acid and amine functional acrylic resins for the formulation of high quality isocyanate free 2-component industrial coatings. This combination produces fast drying two pack coating systems for high durability enamels suitable for heavy duty, maintenance and transport applications.

SYNOCURE® 899 BA 70 LM is a high solids content epoxy acrylic copolymer curing agent designed specifically for use with the Arkema range of SYNOCURE® acid and amine functional acrylic resins for the formulation of high quality isocyanate-free 2-component industrial coatings. SYNOCURE® 899 BA 70 LM is a lower molecular weight variant of SYNOCURE® 899 BA 60. When used in combination with the regular solids acrylics, SYNOCURE® 890 S 55 and SYNOCURE® 895 S 55, benefits of improved solids and reduced VOC can be achieved.

SYNOCURE® 9000 S 60 is an acrylic polyol designed for either 2K urethane or thermoset applications with good flexibility, impact resistance, color retention, and adhesion.

SYNOCURE® 9067 S 80 is a high solids acrylic polyol for 2K urethane or thermoset applications with good flexibility, low VOC capability, high gloss, and good gloss retention.

SYNOCURE® 9069 S 50 is a hydroxyl functional thermosetting acrylic resin with outstanding exterior durability and color retention, excellent flexibility and impact resistance, very good adhesion to metal substrates, and good fabrication and forming properties.

SYNOCURE® 9201 S 75 is a high solid hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. SYNOCURE® 9201 S 75 is particularly recommended for all high performance industrial applications where high performance is required including vehicle refinishing.

SYNOCURE® 9203 S 52 is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions (60°C-80°C) with aliphatic polyisocyanates. SYNOCURE® 9203 S 52 is particularly recommended for use in vehicle refinishing, A.C.E. and transport coatings.

SYNOCURE® 9206 S 65 is a medium solid hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. SYNOCURE® 9206 S 65 is particularly recommended for all high performance industrial applications, clear coat or top coat for protective coating, general industry and car refinish colored top coat.

SYNOCURE® 9207 S 60 is a hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. SYNOCURE® 9207 S 60 is particularly recommended for all high performance industrial applications where fast cure, high crosslinking density and chemical resistance are required.

SYNOCURE® 9212 S 60 is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. SYNOCURE® 9212 S 60 is particularly recommended for use in vehicle refinishing, A.C.E. and transport coatings.

SYNOCURE® 9216 X 60 is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 9216 X 60 is particularly well suited for use in high quality industrial coatings. The excellent adhesion properties make the resin a good choice for primers, fillers and single coat paints for a variety of substrates. Steel, galvanised steel, aluminium, wood, plastic and minerals can all be coated satisfactorily using coatings based on SYNOCURE® 9216 X 60. SYNOCURE® 9216 X 60 has good resistance properties to solvents and chemicals and to exposure to weather and UV light, making it suitable for high quality anti-corrosive protection and for long life decorative coatings, especially on structural steelwork.

SYNOCURE® 9226 BA 82 is a hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. SYNOCURE® 9226 BA 82 is particularly recommended for all high performance industrial applications with a level of COV below 250g/l in paints or varnishes

SYNOCURE® 9228 S 60 9228 S 60 is a hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. SYNOCURE® 9228 S 60 is particularly recommended for all high performance industrial applications where high performance is required especially vehicle refinishing.

SYNOCURE® 9237 S 70 is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 9237 S 70 is particularly well suited for use in high quality compliant industrial marine coatings, heavy duty and protective coatings such as structural steelwork.

SYNOCURE® 9237 S 70 MY is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 9237 S 70 MY is particularly well suited for use in high quality compliant industrial marine coatings, heavy duty and protective coatings such as structural steelwork.

SYNOCURE® 9237S-70 IN is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. SYNOCURE® 9237S-70 IN is particularly recommended for use in high quality compliant industrial coatings, vehicle refinish applications, heavy duty and protective coatings such as structural steelwork.

SYNOCURE® 9239 BA 65 is a hydroxy functional acrylated polyester designed for crosslinking at both ambient temperature and low stoving temperatures with suitable polyisocyanates. SYNOCURE® 9239 BA 65 is primarily intended for use in vehicle refinishing applications, both as a medium for excellent primer surfacers and for finishing coats. Its properties make also suitable for industrial primers, finishes for transport vehicles, car assembling or rigid plastics.

SYNOCURE® 9256 X 70 is a high solid medium hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. SYNOCURE® 9256 X 70 is particularly recommended for high performance industrial applications especially where fast drying and tack free time are required.

SYNOCURE® 9256 X 70 MY is a high solid medium hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. SYNOCURE® 9256 X 70 MY is particularly recommended for high performance industrial applications especially where fast drying and tack free time are required.

SYNOCURE® 9260 BA 70 is a high solid hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. SYNOCURE® 9260 BA 70 is particularly recommended for use in vehicle refinishing, and for all high performance industrial applications where high performance is required.

SYNOCURE® 9266 BA 75 is a high solid hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. Good overall performances.

SYNOCURE® 9271 BA 80 is a high solids, hydroxyl functional acrylic with low isocyanate demand and 2.8 VOC capability, with good adhesion, flexibility, and gloss retention, and long pot life, for cost-effective coatings.

SYNOCURE® 9277 S 65 is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. It is particularly recommended for use in vehicle refinishing, A.C.E., Transport coatings and Heavy Duty Coatings.

SYNOCURE® 9277 S 65 MY is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. It is particularly recommended for use in vehicle refinishing, A.C.E., Transport coatings and Heavy Duty Coatings.

SYNOCURE® 9278 S 60 is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 9278 S 60 is particularly well suited for use in high quality industrial coatings. The excellent adhesion properties make the resin a good choice for primers, fillers and single coat paints for a variety of substrates. Steel, galvanised steel, aluminium, wood, plastic and minerals can all be coated satisfactorily using coatings based on SYNOCURE® 9278 S 60. SYNOCURE® 9278 S 60 has good resistance properties to solvents and chemicals and to exposure to weather and UV light, making it suitable for high quality anticorrosive protection and for long life decorative coatings, especially on structural steelwork.

SYNOCURE® 9279 S 65 is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. It is particularly recommended for use in vehicle refinishing, A.C.E., Transport coatings and Heavy Duty Coatings.

SYNOCURE® 9279 S 70 is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. It is particularly recommended for use in vehicle refinishing, A.C.E., Transport coatings and Heavy Duty Coatings.

SYNOCURE® 9291 BA 75 is a high solid hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 9291 BA 75 is particularly well suited for use in high quality industrial coatings top coat and clear coat. SYNOCURE® 9291 BA 75 has good resistance properties to solvents and chemicals and to exposure to weather and UV light, making it suitable for high quality anti-corrosive protection and for long life heavy duty coating.

SYNOCURE® 9291 BA 75 MY is a high solid hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 9291 BA 75 MY is particularly well suited for use in high quality industrial coatings top coat and clear coat. SYNOCURE® 9291 BA 75 MY has good resistance properties to solvents and chemicals and to exposure to weather and UV light, making it suitable for high quality anti-corrosive protection and for long life heavy duty coating.

SYNOCURE® 9293 BA 70 is a high solid hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. SYNOCURE® 9293 BA 70 is particularly recommended for use in vehicle refinishing, ACE (Agricultural, Construction, Earth-moving equipment), protective coating and for all high performance industrial applications where high performance is required.

SYNOCURE® 9294 BA 70 is a high solid hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. Suggested applications are protective, marine and maintenance coatings.

SYNOCURE® 9299 BA 70 is a hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with polyisocyanates. SYNOCURE® 9299 BA 70 is particularly recommended for all high performance industrial applications where high performance is required.

SYNOCURE® 9299 BA 70 MY is a hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with polyisocyanates. SYNOCURE® 9299 BA 70 MY is particularly recommended for all high performance industrial applications where high performance is required.

SYNOCURE® 9422 BA 70 is an acid functional acrylic resin designed to crosslink at room temperature with epoxy resins to give high solids content isocyanate-free two-pack coating systems. Coatings based on this resin are especially suitable for protection and maintenance in areas where rapid drying, hardness and abrasion resistance are required. SYNOCURE® 9422 BA 70 has been designed to react with economic bisphenol A type epoxies and still maintain good exterior durability.

SYNOCURE® 9422 BA 70 MY is an acid functional acrylic resin designed to crosslink at room temperature with epoxy resins to give high solids content isocyanate-free two-pack coating systems. Coatings based on this resin are especially suitable for protection and maintenance in areas where rapid drying, hardness and abrasion resistance are required. SYNOCURE® 9422 BA 70 MY has been designed to react with economic bisphenol A type epoxies and still maintain good exterior durability.

SYNOCURE® 9452 S 70 is an amine functional acrylic resin designed for use with the epoxy curing agent SYNOCURE® 899 BA 70 LM and SYNOCURE® 899 BA 60 in isocyanate-free two pack coating systems. SYNOCURE® 9452 S 70 is manufactured exclusively for Jotun Paints

SYNOCURE® 9483 S 50 is an acrylic for use in topcoats where a non-isocyanate (NISO) curing system is needed, that has exterior durability, solvent resistance, hardness, adhesion, and color retention. Used for general industrial metal, structural steel and CASE coatings

SYNOCURE® 9484 S 60 is an acrylic for use in fast dry topcoats where a non-isocyanate (NISO) ambient curing system is needed, that has exterior durability, solvent resistance, hardness, adhesion, and color retention.

SYNOCURE® 9485 S 70 is an acrylic for use in topcoats where a non-isocyanate (NISO) curing system is needed, that has exterior durability, solvent resistance, hardness, adhesion, and color retention. Long pot lie. Very high gloss. Requires primer where good corrosion resistance is needed.

SYNOLAC 0691 SD 60 is a high molecular weight thermoplastic saturated polyester, with improved resistance to crystallisation in solution with aromatic solvents. SYNOLAC 0691 SD 60 is recommended for manufacture of high reactive and elastic coil coatings top coats with good resistance to ageing, high quality base coatings with excellent mechanical properties and good chemical resistance, white enamels for collapsible tubes and spraying bottles.

SYNOLAC® 1035 X 60 is a short oil alkyd resin based on tall oil. SYNOLAC® 1035 X 60 is recommended for general purpose stoving enamels, with good mechanical properties and acid catalysed lacquers

SYNOLAC® 1133 X 60 is a short oil length alkyd resin based on fish/tung oil modified with phenolic and rosin. SYNOLAC® 1133 X 60 is recommended for fast air drying anticorrosive industrial primers, fillers and putties and primers and undercoats recoatables with nitrocellulose.

SYNOLAC® 1180 WD 70 is a long oil alkyd based on linseed oil and modified with wood oil and superphenolic resin. SYNOLAC® 1180 WD 70 is recommended for clear varnish for yacht paints and for low aromatic content paints.

SYNOLAC® 133A is a non-drying short oil alkyd based on coconut oil. Outstanding features of SYNOLAC® 133A include good gloss, good flexibility, good adhesion and non-yellowing.

SYNOLAC® 140 X 60 is a short alkyd resin based on soya oil with good reactivity, suitable for short curing oven time. SYNOLAC® 140 X 60 is recommended for general use in oven curing enamels and varnishes, nitrocellulose and acid curing lacquers.

SYNOLAC® 1421 WD 50 is a medium oil alkyd resin designed for use in decorative coatings. SYNOLAC® 1421 WD 50 is particularly adapted to the formulation of glossy varnishes and paints with a good weathering resistance. It is also convenient for fast drying anticorrosive primers formulations. It may also be used in combination with long oil alkyd resins to improve their drying.

SYNOLAC® 151 W 55 is an alkyd resin designed to be used for rapid drying coatings for ironwork, joinery and radiators and for anticorrosive paints.

SYNOLAC® 1529 BA 80 is a low viscosity, saturated, hydroxy functional polyester resin for high solids polyurethane and stoving systems. SYNOLAC® 1529 BA 80 is particularly recommended for use in high solids 2K and stoving systems in combination with relevant low viscosity cure agents. End uses for SYNOLAC® 1529 BA 80 include anticorrosive primers for industrial use, finishes for agricultural machinery and household appliances and general metal coatings. Polyurethane systems based on SYNOLAC® 1529 BA 80 achieve very high gloss levels and provide an excellent colour retention and exterior durability. Relevant coatings show a good balance of hardness, resistance to mechanical stress and flexibility, and an excellent metal adhesion. In combination with suitable melamine formaldehyde resins stoving systems with similar VOCs may be formulated for temperatures of up to 190°C. SYNOLAC® 1529 BA 80 provides good flow characteristics even at very high PVCs, making it suitable also for use in pigment pastes in modern tinting systems.

SYNOLAC® 152S-60 is a good quality, linear oil free polyester resin developed for use in nonyellowing tube coating. SYNOLAC® 152S-60 is recommended to use as sole medium in roller coating and tube coating enamels.

SYNOLAC® 153 ND 60 is an oil-free polyester. SYNOLAC® 153 ND 60 is specially designed for use in metalgraphic and industrial enamels.

SYNOLAC® 153S-60 is a high quality, extremely flexible linear oil free polyester resin developed for use in DWI can coating, collapsible tube, sheet fed metal decorating and coil coating applications.

SYNOLAC® 154S-60 is a good quality, linear oil free polyester resin developed for use in sheet fed metal decorating and coil coating applications.

SYNOLAC® 15S-60 is a medium oil alkyd resin suitable for the formulation of 2K polyurethane wood coatings. The sealers formulated with SYNOLAC® 15S-60 have good sandability, recoatability and transparency. The topcoats formulated with SYNOLAC® 15S-60 are easy to matt and have very good scratch resistance. SYNOLAC® 15S-60 has good yellowing resistance, depending on the polyisocyanate used to crosslink it.

SYNOLAC® 162 W 70 is a soya bean long oil alkyd recommended for decorative enamels and paints, white and pale shades and maintenance paints.

SYNOLAC® 1949 X 70 is a short oil length alkyd resin based on synthetic fatty acids, with excellent gloss and good compromise between drying, levelling and hiding of the sanding marks, exhibiting high yellowing resistance in combination with aliphatic polyisocyanates. SYNOLAC® 1949 X 70 is designed for high gloss two pack polyurethane varnishes and enamels for wood.

High quality air drying enamels with excellent gloss.

SYNOLAC® E 20105-65 is a saturated polyester recommended for the formulation of cost effective coil and metal packaging coating applications.

SYNOLAC® E20108-65 is a saturated polyester recommended for the formulation of cost effective coil and metal packaging coating applications.

SYNOLAC® E 20246-55 is linear oil free polyester developed for use in Coil Coating, Sheet fed metal decorating and General Industrial applications.

SYNOLAC® 2111 WD 70 is a medium oil alkyd based on non yellowing fatty acids, showing a higher film build than standard resins for car bodywork. SYNOLAC® 2111 WD 70 can be considered, in the medium oil alkyd category, as a resin designed for high solids paints. The resin is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling. SYNOLAC® 2111 WD 70 shows an excellent weather resistance, keeping a permanent flexibility.

SYNOLAC® 2126 S 75 is a short oil alkyd resin modified with vegetable fatty acids intended for the formulation of clear and pigmented 2 pack polyurethane systems for furniture and wood items. It also can be used in nitrocellulose lacquers.

SYNOLAC® 267 ND 60 is an acrylic modified polyester resin. SYNOLAC® 267 ND 60 is recommended for "wet-on-wet" overprint varnishes and metal decorating enamels with good standing mechanical processing properties.

SYNOLAC® 2700 WD 70 is an air drying silicone modified isophthalic alkyd recommended for high durability exterior marine and decorative maintenance finishes. SYNOLAC® 2700 WD 70 is used as the sole binder for high durability and temperature resistant coatings on stable substrates (e.g. masonry, plasters, structural steel, exterior cladding repair coats). SYNOLAC® 2700 WD 70 can also be used, in combination with suitable alkyds or thixotropic alkyds, for high durability exterior wood coatings. It is recommended that SYNOLAC® 2700 WD 70 is used at between 45-55% of the total binder solids in order to obtain the improved durability and the flexibility necessary for wood coatings. SYNOLAC® 2700 WD 70 is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling.

SYNOLAC® 272 X 60 is a fast drying, short-oil alkyd for air drying and stoving systems. SYNOLAC® 272 X 60 is universally suitable for a wide range of air drying industrial coatings, like fast drying primers, fillers, single layer coatings and finishes. In combination especially with highly reactive amino formaldehyde resins stoving systems, particularly drum coatings, may be formulated.

SYNOLAC® 27X-55 is a short oil alkyd suitable for use in industrial air drying and stoving finishes.

SYNOLAC® 2833 X 60 is a short oil length alkyd resin based on linseed/tung oil modified with phenolic and rosin. SYNOLAC® 2833 X 60 is recommended for very fast air drying industrial finishes and anticorrosive primers, primers and undercoats recoatable with nitrocellulose lacquers and hammer finishes.

SYNOLAC® 3001 is a long oil oxidising alkyd based on semidrying oil and modified with pentaerythritol. This is recommended for use in high quality non yellowing synthetic enamels having excellent gloss.

SYNOLAC® 3003-70 is a long oil oxidising alkyd based on mixed fatty acid modified with Pentaerythritol. SYNOLAC® 3003-70 is recommended for use in high quality decorative paints and air drying enamels with excellent gloss

SYNOLAC® 3132 X 75 is a short oil chain-stopped high solids alkyd suitable for use in industrial air dry, force dry and stoving finishes. SYNOLAC® 3132 X 75 is recommended for use in machinery, agricultural and transport finishes. It is equally suitable for interior and exterior applications. It can also be used in combination with conventional short or medium oil alkyds to reduce VOC.

SYNOLAC® 3133 X 74 is a high solids content alkyd/acrylic hybrid resin. SYNOLAC® 3133 X 74 is recommended for use in machinery, agricultural implement and general industrial finishes. It is equally suitable for interior and exterior application. Although coatings based on SYNOLAC® 3133 X 74 show good air-dry performance they can also be force-dried. The hybrid structure of SYNOLAC® 3133 X 74 results in improved hardening rate compared with conventional alkyd based coatings especially during the early stages after application when this is such an important feature.

SYNOLAC® 3315 BA 70 is a vegetable fatty acids modified polyester resin with resistance to chemical agents, high flexibility and adherence to the surface. Their hydroxyl groups are very reactive and react very fast with the NCO groups at room temperature. SYNOLAC® 3315 BA 70 is recommended for non yellowing polyurethane sealers and finishes for wood, varnishes and paints for boats, polyurethane paints for industrial protection and universal pigmented pastes.

SYNOLAC® 3636 BA 80 is a high solid saturated polyester resin, containing hydroxyl groups. SYNOLAC® 3636 BA 80 is recommended for two-component polyurethane varnishes and paints with excellent weather resistance, chemical resistance, high elasticity paints. It is suitable for automotive, general industry, aviation applications and for plasticizing 2 pack PU acrylic systems.

SYNOLAC® 377 BA 70 is a fatty acid modified hydroxyfunctional polyester resin based on special fatty acids, designed to crosslink with aromatic and/or aliphatic polyisocyanates for 2 pack-polyurethane coatings with excellent flexibility and adhesion. Two pack-coatings based on SYNOLAC® 377 BA 70 are especially suitable for wood finishes in the furniture industry, selecting the appropiate polyisocyanates.

SYNOLAC® 37A is an acrylated copolymer resin designed to produce fast curing finishes with good flexibility, colour retention, gloss and good tooling characteristics for the manufacture of roller coatings on metal substrates.

SYNOLAC® 40 X 60 is a styrenated short oil alkyd resin modified with dehydrated castor and soya oils. SYNOLAC® 40 X 60 is recommended for very fast air drying spraying finishes, water and mineral oil resistant finishes and primers for crankcases.

SYNOLAC® 4004-70 is a long oil oxidising alkyd based on dehydrated castor oil. This is recommended for use in stoving enamels.

SYNOLAC® 4013 WD 85 is a long oil alkyd designed for use in decorative paints and wood stains. SYNOLAC® 4013 WD 85 has been developed for the formulation of 2010 VOC compliant architectural coatings (Directive 2004/42/CED). Alone or combined with a solvent-free alkyd diluent, SYNOLAC® 4100 for instance, allows to formulate a wide range of coatings exhibiting a good hardness development. SYNOLAC® 4013 WD 85 is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling.

SYNOLAC® 4060 WDA 90 is a high solids long oil alkyd resin designed for use in decorative coatings. SYNOLAC® 4060 WDA 90 has been developed to formulate a wide range of architectural coatings. Its low viscosity combined with its high solid content allows the use of thixotropic resins - such as GELKYD® - silicone-modified alkyds and urethan-modified alkyds to produce high quality, 2010 VOC compliant (Directive 2004/42/CE) decorative coatings formulations. SYNOLAC® 4060 WDA 90 is supplied in low aromatic high flash white spirit to enable the formulation of coatings that do not require adverse environmental labelling.

SYNOLAC® 4060 WP 90 is a high solids long oil alkyd resin designed for use in decorative coatings. SYNOLAC® 4060 WP 90 has been developed to formulate a wide range of architectural coatings. Its low viscosity combined with its high solid content allows the use of thixotropic resins - such as GELKYD® - silicone-modified alkyds and urethane-modified alkyds to produce high quality, 2010 VOC (Directive 2004/42/CE) compliant decorative coatings formulations. SYNOLAC® 4060 WP 90 is supplied in isoparaffinic solvent to enable the formulation of coatings that do not require adverse environmental labelling.

SYNOLAC® 4097 WD 75 is a long oil oxidising alkyd designed to formulate a wide range of 2010 VOC compliant paints and varnishes (directive 2004/42/CE). SYNOLAC® 4097 WD 75 is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling.

SYNOLAC® 40X60 MY is a styrenated short oil alkyd resin modified with dehydrated castor and soya oils. SYNOLAC® 40X60 MY is recommended for very fast air drying spraying finishes, water and mineral oil resistant finishes and primers for crankcases.

SYNOLAC® 4100 is a solvent-free long oil alkyd designed for use in low VOC decorative coatings in combination with other long oil alkyds. SYNOLAC® 4100 very low viscosity and good solvency power enable the formulation of VOC 2010 compliant coatings (Directive 2004/42/CE). SYNOLAC® 4100 is a very good alkyd reactive diluent for all conventional long oil alkyd resins - modified or not - making it suitable for the formulation of topcoats, enamels, etc… Its low viscosity ensures a good penetration into porous substrates, hence it is adapted to the formulation of primers and woodstains.

SYNOLAC® 4103 WD 85 is a long oil alkyd designed for use in 2010 VOC (Directive 2004/42/CE) compliant decorative paints and woodstains. SYNOLAC® 4103 WD 85 has been specifically designed to be used in combination with SR-350 (1) - a trifunctional methacrylic monomer - for optimum hardness development. SYNOLAC® 4103 WD 85 is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling.

SYNOLAC® 4200 is a solvent-free long oil alkyd designed for use in low VOC decorative coatings in combination with other long oil alkyds. SYNOLAC® 4200 very low viscosity and good solvency power enable the formulation of VOC 2010 compliant coatings (Directive 2004/42/CE). SYNOLAC® 4200 is a very good alkyd reactive diluent for all conventional long oil alkyd resins - modified or not - making it suitable for the formulation of topcoats, enamels, etc… Its low viscosity ensures a good penetration into porous substrates, hence it is adapted to the formulation of primers and woodstains.

SYNOLAC® 4210W55 is a medium oil oxidizing alkyd that produces a wide range of high quality air drying finishes. It provides an excellent combination of fast drying and toughness, together with excellent colour retention and durability.

SYNOLAC® 435 BA 70 is a semi-drying, medium-oil alkyd for nitrocellulose combination varnishes, acid curing paints and 2 K-polyurethane systems for wood coatings. SYNOLAC® 435 BA 70 is particularly recommended for use in nitrocellulose varnishes with comparatively good film build for industrial furniture finishing. SYNOLAC® 435 BA 70 provides an excellent plasticizing effect for nitrocellulose. In relevant formulations it achieves high gloss levels and a good balance of flexibility and hardness allowing the formulation of varnishes with increased levels of alkyd resin and thus improved film build. In acid curing systems SYNOLAC® 435 BA 70 shows a good reactivity and provides a good flexibility even at low temperatures. Stoving systems based on SYNOLAC® 435 BA 70 also maintain a good balance of hardness and flexibility and show a good gloss retention in exterior applications.

SYNOLAC® 463 X 60 is a short oil epoxy ester used in air drying and stoving primers and finishes for a wide variety of applications. SYNOLAC® 463 X 60 is particularly suitable for use in air drying primers where good anticorrosive properties are essential and in automobile stoving primers where high performance in terms of adhesion and chemical resistance are desirable. The use of 5% - 15% of melamine resin on total resin content will give an increased rate of cure in stoving systems. The excellent resistance of SYNOLAC® 463 X 60 to acids and alcalis can be used to advantage in air drying and stoving finishes for application by spraying. Bronze finishing is one typical air drying application and paints for bicycle frames are typical of the use made of the resin in stoving finishes.

SYNOLAC® 5001-70 is a short oil non-oxidising alkyd resin. This resin is recommended to use with amino resins for stoving enamels and plasticizing alkyd in NC lacquers.

SYNOLAC® 5014 X 60 is a short oil length chain stopped alkyd based on linoleic rich fatty acids. SYNOLAC® 5014 X 60 is recommended for the formulation of air drying industrial primers and topcoats suitable for the protection of structural steel and general industrial applications.

SYNOLAC® 5053 WD 50 is a medium oil alkyd resin for general purpose. Due to good balance between surface drying and hard drying, SYNOLAC® 5053 WD 50 is designed to formulation paints and anti corrosive paints.

SYNOLAC® 5069S-65 is a saturated polyester developed for use in coil coating, sheet fade metal decorating and general industrial applications.

SYNOLAC® 5070S-65 is a saturated polyester suitable for coil coating top coats. It gives very good adhesion and flexibility. It is designed for applications in Coil coating, sheet fade metal decorating and industrial applications.

SYNOLAC® 5085 is a solvent-free low viscosity linear saturated polyester (typical average molecular weight 1500). SYNOLAC® 5085 is a very compatible low viscosity modifier designed for blending with other systems. SYNOLAC® 5085 is suitable for use with 2-component acrylic isocyanate or polyester isocyanate systems, high quality stoving systems.

SYNOLAC® 5086 is a low viscosity linear saturated polyester with good compatibility designed for blending with other systems in order to increase solids and reduce volatile organic contents. SYNOLAC® 5086 is a highly versatile resin that can be used in diverse end-uses such as 2-component acrylic isocyanate or polyester isocyanate systems and high quality stoving systems. SYNOLAC® 5086 will react into the blended system via its high hydroxyl content, and will not compromise durability.

SYNOLAC® 5140 X 41 is a silicone modified isophthalic acid alkyd based on linseed oil recommended for fast drying coatings where a combination of heat resistance, corrosion resistance or insulating properties is required, e.g. furnaces, chimneys, electrical equipment, etc. SYNOLAC® 5140 X 41 is recommended for high quality fast drying coatings.

SYNOLAC® 51W is a medium oil oxidizing alkyd that produces a wide range of high quality air drying finishes and which can also be used for force dry and stoving finishes. It provides an excellent combination of fast drying and toughness, together with excellent colour retention and durability.

SYNOLAC® 5201 X 55 is an acrylic modified short oil alkyd resin recommended for fast air drying and low bake industrial coatings. Application and overcoating properties are exceptionally good for a resin of this type.

SYNOLAC® 5206 X 50 is an acrylic modified short oil alkyd resin recommended for very fast air dry industrial coatings. A useful feature of this resin is its very good compatibility with other film formers. It therefore offers the formulator greater choice to customise coating performance.

SYNOLAC® 5237 S 50 is a linoleic alkyd resin modified with mixed monomers. SYNOLAC® 5237 S 50 is suitable for fast air dry and force dry industrial paints. Coatings based on SYNOLAC® 5237 S 50 touch dry in 10 minutes to give high gloss, flexible and durable films. Monomer choice yields exceptional weathering properties.

SYNOLAC® 5250 X 50 is a styrenated short oil alkyd resin based on dehydrated castor oil, showing faster air drying than most of the resins of this type. SYNOLAC® 5250 X 50 has been essentially designed for the preparation of polyurethane primers. A primer based on SYNOLAC® 5250 X 50, applied by spray or dipping, can be easily recoated after 20-30 minutes after by a polyurethane lacquer without wrinkling. In addition, it allows to make paints for projectiles (negative result to the Storch-Morawski reaction) and hammered paints with good mar resistance and good hardness development. SYNOLAC® 5250 X 50 can be used for the preparation of industrial lacquers with quick drying and good resistance to fuel.

SYNOLAC® 5387 X 60 is a special epoxy ester, with a quick air drying, hardness development and a fast recoatability. This resin is essentially designed for the preparation of anticorrosive primers.

SYNOLAC® 539 BA 70 is a fatty acid modified polyester resin and designed to crosslink with aromatic and/or aliphatic polyisocyanates for two pack-polyurethane coatings with excellent flexibility and adhesion what is especially interesting for industrial wood finishing and metal.

SYNOLAC® 5402 X 60 is an short oil alkyd resin. SYNOLAC® 5402 X 60 have a remarkable fast drying and hardness development resin. It has been especially designed for fast air drying lacquers, for low temperatures (60°C-80°C) stoving lacquers and for stoving lacquers in combination with an amino resin. Moreover, it shows a good weatherability.

SYNOLAC® 5404 X 60 is an alkyd resin based on linoleic rich oil, designed to formulation air drying paints and general purpose stoving enamels.

SYNOLAC® 5512 X 60 is a short alkyd resin based on vegetable fatty acids. The flexibility is the main feature of SYNOLAC® 5512 X 60 and it is mainly used for highly pigmented 2 pack PU sealers for wood and as a plasticizer for other SYNOLAC® types, without loosing its drying and sanding properties. It also provides a very fast hardening speed in two component polyurethane varnishes.

SYNOLAC® 5576 S 65 is a short alkyd resin based on vegetable fatty acids, designed for the formulation of two pack polyurethane sealers and topcoats and nitrocellulose combinations for the furniture industry.

SYNOLAC® 5670S-55 is a saturated, aliphatic-based polyester developed for use in coil coating, sheet fade metal decorating and industrial applications.

SYNOLAC® 5670S-65 is a linear saturated polyester developed as primer resin for use in coil coating, sheet fade metal decorating and industrial applications.

SYNOLAC® 60 WD 70 is a long oil alkyd developed for use for the formulation of interior and exterior decorative paints and varnishes. SYNOLAC® 60 WD 70 is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling.

SYNOLAC® 6005 WDA 70 SYNOLAC® 6005 WDA 70 is especially adapted to the formulation of exterior coatings. Primers, undercoats, glossy finishes as well as varnishes and woodstains exhibiting a very good durability can be formulated with SYNOLAC® 6005 WDA 70. SYNOLAC® 6005 WDA 70 specific polymer design ensures a very high and stable flexibility to the coating which is necessary when applied on a wooden substrate. SYNOLAC® 6005 WDA 70 is supplied in low aromatic high flash white spirit to enable the formulation of coatings that do not require adverse environmental labelling.

SYNOLAC® 606 WD 75 is a low yellowing long oil alkyd designed for use in high quality decorative and industrial topcoats. It is more specifically adapted to the formulation of interior and exterior paints. SYNOLAC® 606 WD 75 can be formulated into a range of decorative coatings that meet the 2010 VOC limits set in Directive 2004/42/CE. SYNOLAC® 606 WD 75 is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling.

SYNOLAC® 655W-55 is a urethane alkyd designed for use in clear and pigmented finishes as the sole medium or in combination with long oil alkyds. Rapid drying and excellent gloss retention, together with good abrasion resistance and colour retention are achieved with paints incorporating even minor proportion of SYNOLAC® 655W-55.

SYNOLAC® 6883 is a long oil isophthalic acid based alkyd. Its very good pigment wetting properties make it suitable for use as a grinding medium and as an additive to improve the build of alkyd enamels. It can be used as a co-binder for decorative gloss paints and varnishes to improve build and extend the open time of the coating. The isophthalic backbone gives added water and saponification resistance. SYNOLAC® 6883 can be used in combination with high solid long oil alkyds in matt and satin- finish paints in order to improve the open time, build and in particular to enhance the flexibility of the film, thus avoiding the problems of cracking and peeling upon ageing.

SYNOLAC® 7025 S 50 HV is a high molecular weight short oil alkyd resin based on vegetable fatty acids designed for the formulation of 2 pack polyurethane systems. SYNOLAC® 7025 S 50 HV is a general purpose resin, with broad application field, suitable for polyurethane wood sealers and topcoats, providing fast sanding and good recoatability at low crosslinking levels.It is recommended for clear and pigmented coatings for the furniture industry.

SYNOLAC® 7035 S 55 is a high molecular weight short oil alkyd resin. SYNOLAC® 7035 S 55 is suitable for 2 pack polyurethane wood sealers providing fast drying, good sanding and excellent filling power.

SYNOLAC® 70S-50 is a high molecular weight short oil alkyd resin based on vegetable fatty acids designed for the formulation of 2 pack polyurethane systems. SYNOLAC® 70S-50 is a general purpose resin, with broad application field, suitable for polyurethane wood sealers and topcoats, providing fast sanding and good recoatability at low crosslinking levels. It is recommended for clear and pigmented coatings for the furniture industry.

SYNOLAC® 7210 X 60 is a low viscosity short oil alkyd resin based on dehydrated castor oil specially designed to be used in combination with amino resins for general purpose primers and enamels.

SYNOLAC® 72S-55 is a medium oil oxidising alkyd developed for use in a wide range of vehicle refinishing fast air-drying and stoving applications. This resin can be used in two-pack applications also.

SYNOLAC® 7390 X 60 is a short alkyd resin based on saturated fatty acids. SYNOLAC® 7390 X 60 is specially designed for clear and pigmented high gloss polyurethane wood coatings. SYNOLAC® 7390 X 60 shows outstanding compromise between gloss and drying, as well as an excellent yellowing resistance in systems crosslinked with aliphatic polyisocyanates.

SYNOLAC® 75 ND 64 is a medium molecular weight linear thermoplastic saturated polyester resin. This resin is especially recommended for metallic coatings with excellent mechanical properties, allowing mechanical processing. SYNOLAC® 75 ND 64 is recommended for high quality base coatings with excellent mechanical properties, “Coil-coating” enamel and overprint varnishes.

SYNOLAC® 7500 is a long oil length, high solid, oxidising alkyd. SYNOLAC® 7500 exhibits good penetration into wooden substrates and very smooth wiping feel. It has very good gloss and flexibility.

SYNOLAC® 7503 X 60 is a short oil length alkyd on dehydrated castor oil modified with phenolic, specially designed for anticorrosive primer industrial with excellent mechanicals properties. SYNOLAC® 7503 X 60 is recommended for quick air drying primers, surfaces and finishes, petrol resistant enamels, agricultural machinery and hammer finishes.

SYNOLAC® 755 WD 60 is a medium oil length alkyd resin based on low yellowing drying acids. SYNOLAC® 755 WD 60 is recommended for decorative enamels, general purpose enamels and paints with good colour retention, gloss and good through-drying. The resin is supplied in low aromatic white spirit, thus enabling the manufacture of decorative paints with low environmental impact.

SYNOLAC® 78 W 50 is a medium oil alkyd. SYNOLAC® 78 W 50 is especially adapted to fast drying topcoats without the need for hazardous labelling, topcoat for transport finishes and fast drying decorative varnishes.

SYNOLAC® 79S-55 is a medium oil chain stopped alkyd resin based on soyabean fatty acid. SYNOLAC® 79S-55 is recommended for use in general purpose high quality air drying and force drying industrial finishes.

SYNOLAC® 8002 DBA 80 is a low viscosity aromatic free short oil alkyd resin based on castor oil specially designed to be used in combination with amino resins for general purpose high solids and low VOC primers and enamels.

SYNOLAC® 800AG is an oil-free polyester designed for coil coating applications. It is also suitable for general metal and automotive refinish coating. This resin offers excellent pigment wetting, strong adhesion, and flexibility, while remaining a tough film. SYNOLAC® 800AG is frequently used in automotive refinish for both solid color pigmented basecoat and metallic basecoat. It is being used together with CAB, which accelerates drying time and enhances the metallic effect of the coatings.

SYNOLAC® 8021 X 70 is a short oil high solid air drying alkyd.

SYNOLAC® 8026 X 60 is a short oil alkyd resin based on soya rich oil, designed for the formulation of nitrocellulose lacquers and varnishes, very fast drying sealers, fillers and primers with easy sanding, very fast air drying varnishes and paints, two pack polyurethane lacquers and general purpose stoving enamels.

SYNOLAC® 8029 X 50 is a chain-stopped soya short oil alkyd with fast through-dry times and good aliphatic solvent tolerance, for use in air dry or bake industrial metal coatings.

SYNOLAC® 8030 X 50 is a chain-stopped tall short oil alkyd with fast tack-free and through-dry times, and good adhesion, flexibility, and solubility in aliphatic solvents, for use in low temp air-dry or bake automotive refinish and argricultural equipment coatings.

SYNOLAC® 8031 S 75 is a short oil alkyd designed for use with nitrocellulose in aromatic-free nitrocellulose wood lacquers and with urea-formaldehyde and melamine-formaldehyde resins in high solids acid catalysed varnishes. SYNOLAC® 8031 S 75 provides an excellent plasticizing effect for nitrocellulose. The nitrocellulose lacquers based on SYNOLAC® 8031 S 75 show good film build and a good balance of flexibility and hardness.

SYNOLAC® 8032 X 75 is a high solids chain-stopped soya/DCO short oil alkyd with fast surface dry times, superior gloss retention, and excellent early water spot resistance, for use in 2K urethane metal coatings.

SYNOLAC® 8035 X 60 is a short oil alkyd resin for air drying topcoats with a good exterior durability, quick-drying sealers and low temperature baking primers and topcoats in combination with urea formol resins

SYNOLAC® 8036 BA 75 is a short oil alkyd resin modified with vegetable fatty acids. SYNOLAC® 8036 BA 75 is a general purpose resin designed for the formulation of fast drying nitrocellulose lacquers, acid curing systems with long pot life and stoving paints.

SYNOLAC® 8037 S 75 is a high solids chain-stopped TOFA short oil alkyd, with fast tack free times and good exterior durability and toughness, for use in agricultural and heavy-duty equipment coatings.

Synolac® 8038 S 75 is a high solids chain-stopped TOFA short oil alkyd, with fast tack free times and good exterior durability and toughness, for use in agricultural and heavy-duty equipment c

SYNOLAC® 8045 MK 75 is a high solids chain-stopped soya/DCO short oil alkyd with fast surface dry times, superior gloss retention, and excellent early water spot resistance, for use in 2K urethane metal coatings. SYNOLAC® 8045 MK 75 is the HAPs-free version of SYNOLAC® 8032 X 75.

SYNOLAC® 8049 S 55 is a fast drying medium oil alkyd resin based on colour retentive fatty acids. SYNOLAC® 8049 S 55 can be used preferably as air drying single layer and topcoats, e.g., for machinery paints, transport finishes and general industrial paints.The through drying and gloss can be improved by combination with hard resins (e.g. maleic resins).

SYNOLAC® 8068 X 50 is a chain-stopped soya short oil alkyd with high gloss, superior gloss retention, and excellent salt spray resistance, for use in 2K urethane metal coatings.

SYNOLAC® 8069 S 50 is a chain-stopped soya short oil alkyd with high gloss, superior gloss retention, and excellent salt spray resistance, for use in 2K urethane metal coatings. SYNOLAC® 8069 S 50 is SYNOLAC® 8068 X 50 in Rule 66 solvent blend.

SYNOLAC® 8080 S 60 is a chain-stopped soya short oil alkyd with high gloss, superior gloss retention, and excellent salt spray resistance, for use in 2K urethane metal coatings. SYNOLAC® 8080 S 60 is the t-butyl acetate version of SYNOLAC® 8068 X 50.

Synolac® 8084 X 90 is a high solids short oil TOFA baking alkyd with high hardness and low temperature cure, for use in metal coatings.